Scab owners: Do your doors rattle?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Rptrchk

Raptor Addict
Joined
Apr 10, 2018
Posts
55
Reaction score
50
Location
Texas
Custom ordered my 2017 SCab 802a with sunroof. 23k miles so far no rattles. Maybe because my stereo is on pretty loud whenever I drive, but I'll definitely be watching this thread in case something develops.
 

rtmozingo

FRF Addict
Joined
Aug 3, 2017
Posts
1,142
Reaction score
748
Location
North Texas
I believe these claims of no rattles. My passenger side doesn’t make a sound. Just a shame both sides aren’t like that. Even more a annoying that it’s inches away from my left ear.

If anyone has any ideas please chime in here.

I’ve been thinking about realigning the door, or trying to shift the striker bar inward possibly.

I tried taping the upper striker bar. No change.

I've isolated it to the pillar window area. It got worse after my last offroad run, so at times it is clicking multiple times in 3 or so seconds. It seems to be above where the seat belt holder is, if not directly behind it - pretty much directly across from my ear.

It is pretty much all trim and molding. The window trim (where the keypad is) has a piece that actually comes 'inside' the door, and it seems to make the same noise I'm hearing. I've seen others complain over time the piece will begin flexing in the wind, causing noise, and this has been my suspicion from the get go. It seems the most likely culprit, but outside of replacing it (which is a bit of a process) I see no immediately apparent way to stop it.

There are several other pieces that could be moving and making the noise, but I've no idea how to stop it, minus perhaps replacing them, which I'm doubtful would make a difference.
 

Big Blue

Administrator
Staff member
Admin
Supporting Member
Joined
Aug 1, 2011
Posts
4,270
Reaction score
7,584
Location
USA
Wow, I guess I'm lucky! Had a Gen 1 scab never made a sound and now a Gen 2 scab and it doesn't make a sound either.
 

rtmozingo

FRF Addict
Joined
Aug 3, 2017
Posts
1,142
Reaction score
748
Location
North Texas
Alright, so pushing out on this trim piece seems to eradicate the noise. Someone online pulled it off and had no noise, so something in there is rubbing I think. Anyone know how to take it off or do I need to buy the service manual?
IMAG2028.jpg
 

isis

FRF Supporting Member
Supporting Member
Joined
Aug 28, 2019
Posts
1,835
Reaction score
1,780
Location
PA
I have a 2017 and the only noise is something inside of the door that rolls front to back when I’m on a slope.
 

jeanco

2019 scab=gone,24 AMB 801A
Supporting Member
Joined
May 3, 2019
Posts
901
Reaction score
551
Location
OR Beach
have a noise when touch panel with my left knee,2019 scab.
 
Top