RPG Traction Bars and RPG Deaver +6 HD

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
BIGDJE

BIGDJE

Full Access Member
Joined
Oct 30, 2018
Posts
596
Reaction score
508
Location
OC, CALI
what are you doing to raise the front up now that you added another 2 in the rear? Spindles alone going to net you that?
New fronts are coil overs just turn them to raise to equal back perfect level

Sent from my SM-G975U using Tapatalk
 

FGHT ON

Full Access Member
Joined
May 1, 2017
Posts
136
Reaction score
58
New fronts are coil overs just turn them to raise to equal back perfect level

Sent from my SM-G975U using Tapatalk

Have any pictures of the front setup yet? I thought I read you could get up to an extra inch w coil overs, not 3.

I have +3 in the rear but I still don’t have the slight rake I was looking for so removed my spare for the time being. I was going to order +4 so I could put back the spare when I upgrade to the 3.0s, but would love to get even an extra few more inches and go to 37.
 
OP
OP
BIGDJE

BIGDJE

Full Access Member
Joined
Oct 30, 2018
Posts
596
Reaction score
508
Location
OC, CALI
Have any pictures of the front setup yet? I thought I read you could get up to an extra inch w coil overs, not 3.

I have +3 in the rear but I still don’t have the slight rake I was looking for so removed my spare for the time being. I was going to order +4 so I could put back the spare when I upgrade to the 3.0s, but would love to get even an extra few more inches and go to 37.
Front is not done yet the coils are at paint they come black i painted them blue. I need 2 inches higher in front which won't be a problem with coil overs. Rpg shop truck has same set up with 37s.

Sent from my SM-G975U using Tapatalk
 
OP
OP
BIGDJE

BIGDJE

Full Access Member
Joined
Oct 30, 2018
Posts
596
Reaction score
508
Location
OC, CALI
Fronts went on today only shocks to level front and back. Drive 2200 miles to south Carolina monday for 2 weeks. Rest will get installed 1st week of jan and paint springs blue. Along with turbos upgrade. Others then 37s truck will finally be done bleeding me dry of money lol I don't even want to post how much I spent to date. a7a5842e82b549563154a83cadb6b1e2.jpg

Sent from my SM-G975U using Tapatalk
 
OP
OP
BIGDJE

BIGDJE

Full Access Member
Joined
Oct 30, 2018
Posts
596
Reaction score
508
Location
OC, CALI
I measured ground to bottom of wheel arch today its 45 inches have about 500lbs on bed with cap, tire and custom RPG tire cage with 3 ton jack impact gun and fire extinguisher and had full tank of fuel

20191106_102939.jpg
 

MAMiller44

Full Access Member
Joined
Apr 15, 2020
Posts
480
Reaction score
643
Location
Tampa, FL
I measured ground to bottom of wheel arch today its 45 inches have about 500lbs on bed with cap, tire and custom RPG tire cage with 3 ton jack impact gun and fire extinguisher and had full tank of fuel

View attachment 157773
Tasteful LEDs. I’m a big proponent of use all the LEDs you want as long as they’re done tastefully lol
 
OP
OP
BIGDJE

BIGDJE

Full Access Member
Joined
Oct 30, 2018
Posts
596
Reaction score
508
Location
OC, CALI
Front shocks went on before I drove 5K miles round trip to front to back was level. Was off a little bit but whole front has to come back off next week so was close enough for the drive. The coils came back from powder coat now blue. I had front and rear shocks set to soft and truck rode like butter whole trip. Love the new set up.

20201211_124518.jpg

20201211_124509.jpg

20201211_124514.jpg

630456797.jpg
 
Top