Rpg Raceline or Raceworks front bumper

[SwampKing]

I guess I should clarify...the Stewarts bumper bolts on, but it bolts to mounts that are welded onto the frame after you cut the front of the rails off.

+1. I called and spoke to Stewart's raceworks directly last month. Their bumper requires a bit More cutting than RPG's AND requires welding supports to the frame to make it a bolt on Bumper afterwards. Although You are required to personally weld light tabs on yourself, They'll be offering a radius mount in the near future though. If I can't get my raceline by RPG soon enough, Stewart's might be an alternative front for me.

 

[Phyguy]

here's the install video for the RPG frame modification. It's easy as cake.

Race Line Front Bumper Frame Mod | RPG Offroad

 

[SwampKing]

here's the install video for the RPG frame modification. It's easy as cake.

Race Line Front Bumper Frame Mod | RPG Offroad

That's cake! Now it's time I get my bumpers in! Hehe!

 

[GoMuscles]

Only thing I didn't like about the Raceworks is that the bumper doesn't extend out far enough IMO... Especially if your running Boatecs or other FGlass fenders.

 

[starkall]

I like how the RPG doesn't require welding but like how the Raceworks sits tighter to the front end and gives it more of the trophy truck look like their luxury prerunners they build.

 

[pat'sRAPTOR]

Honestly either way you go you're still getting an amazing bumper!! It just comes down to how much work you wanna have done. Welding on the mounts for the Stewarts is a little more work than I would wanna do but that's just me. I was perfectly fine with cutting the frame that's can always get welded back on bit welding on omits after cutting the frame would suk if you ever had to take off the mounts but then again I'm sure if anyone cuts the frame for a bumper like these two they don't plan on put if the cut off piece back on lol I sure don't plan on it!

 

[SwampKing]

With the Stewart's front bumper, the weld on omits would help ridged the frame where we would have cut too. I'm sold on RPG stuffs though so I'm not worried much in that area. Does anyone have pictures of Stewart's Omits that we would need to get welded on?!