Rogue UCA

[NECKROLL]

Not a big thing im worried about but i have squeeking from the bushings on my newly installed uca's...should i have used grease or something else during install? and is there a way to eliminate the creaking without having to remove?


thank you in advance.

Adam

 

[billj214]

Likely will go away, needs time to break in.

Sent from my XT1254 using Tapatalk

 

[SZDZMTR]

Did you call Rogue?

 

[NECKROLL]

Did you call Rogue?

i have not called rogue yet..was thinking bout it though.

 

[Doc Constantine]

Rogue installed mine and they have never made noise. I'm pretty sure they don't have a grease zerk, you might be able to hit them with a spray lube, not sure if it will help.

 

[Deleted member 12951]

What UCA's do you have? I have their Heim ones and no issues

 

[Fb73]

Must be Heims UCA. I have the Rogue UCAs with bushing and they don't make any noise, plus you have a grease zerk on the bushings

 

[NECKROLL]

i have the regular ones with the bushings...not to totally noob it out but the nozzle on the top is the zerk? i can add grease into the bushing?

 

[Doc Constantine]

i have the regular ones with the bushings...not to totally noob it out but the nozzle on the top is the zerk? i can add grease into the bushing?

Yea, nipple with the hole in it. Rogue told me to use white lithium for my lowers etc, I'd guess its the same for the uppers. I've been told 5 pumps from the gun or pump until it oozes out the side, the latter was what it took to quiet my rear down.

 

[NECKROLL]

Yea, nipple with the hole in it. Rogue told me to use white lithium for my lowers etc, I'd guess its the same for the uppers. I've been told 5 pumps from the gun or pump until it oozes out the side, the latter was what it took to quiet my rear down.

awesome will tackle this weekend and report back. thank yall for the help. i did the installation of the uca, tie rods, 3.0 kings and gusset kit myself so its been a learning process.