Ridgid Fog kit

[Viper]

I think the LED just above the tow hooks is sweet. I hate the fact that I have to run both front and back plates though!!!

How do you think it would shine if there WERE a plate in the middle of that light? I would almost be like to fogs, wouldn't it?

+1... The reason my inital thought was, White D2 spots on either side of the plate then 8"+ amber fog floods in the lower corners... Still not totally written off, but the "kit" should take a lot of guess work out for an automotive imbisile like me...

 

[swoop1156]

Swoop...

I ran through these very pics last night and was curious about your light configuration... Sweet shots, and a big help. I'm now thinking the D2 kits in the corners, white spots inside amber floods. Then perhaps a rigid 40" behind the grill. plus Duallys behind and also hardwire amber strips behind the SVT Ducati style...

What's your Aux config for your setup ion the pics???

BIG HELP???

Viper

Viper-dude, So if I am thinking this correctly, you want to have either two dually's mounted, both amber or a 6" or 8" single LED in amber in the fog openings and then a 4" white spot dually in the lower grill (on either side of the front plate)? I don't see the point in that, but it's definitely do-able.

For the AUX config with my old truck (I don't have any aux lighting in the new Screw yet), it was the following:

AUX 1: 40"
AUX 2: 20"
AUX 3: White Dually's
AUX 4: Amber Dually's

I think the LED just above the tow hooks is sweet. I hate the fact that I have to run both front and back plates though!!!

How do you think it would shine if there WERE a plate in the middle of that light? I would almost be like to fogs, wouldn't it?

RIGID makes a "front-plate kit" so to say as I said above... They use a 4" dually on each side of the front plate.

+1... The reason my inital thought was, White D2 spots on either side of the plate then 8"+ amber fog floods in the lower corners... Still not totally written off, but the "kit" should take a lot of guess work out for an automotive imbisile like me...

I still recommend the normal bumper opening Dually kit. Definitely more than enough light as my pictures show.

 

[Ruger]

Guys, I almost went with Rigid D2s myself. But then I asked the company if their products are street legal. They're not, not even the fog lights.

 

[Viper]

Viper-dude, So if I am thinking this correctly, you want to have either two dually's mounted, both amber or a 6" or 8" single LED in amber in the fog openings and then a 4" white spot dually in the lower grill (on either side of the front plate)? I don't see the point in that, but it's definitely do-able.

For the AUX config with my old truck (I don't have any aux lighting in the new Screw yet), it was the following:

AUX 1: 40"
AUX 2: 20"
AUX 3: White Dually's
AUX 4: Amber Dually's


RIGID makes a "front-plate kit" so to say as I said above... They use a 4" dually on each side of the front plate.
I still recommend the normal bumper opening Dually kit. Definitely more than enough light as my pictures show.

Just tossing ideas around... larger ambers in the corners, white D2's bracketing the plate, vs Amber/white D2 kits in the corner alone plus something else center... (behind grill 40" perhaps)

I do tend to have to deal with a good bit of fog up here, esp spring and fall, so i'll be powering my set up on road till ol'smokey takes them off himeself... Thx for the help...

 

[Speeez]

Just installed the 20" and duallys this past weekend. I'm running the outside duals with a fog pattern and have no problems on the street. They don't throw any more light than the stock foggers on my lightning.

 

[swoop1156]

That 20" is awesome, huh? I'd love to install the Dually's again, but I really don't want the hassle.