GEN 2 Raptor Dyno Day Results

[xrocket21]

Mods:

-AFE intake
-SPD Turbo Adapters
-5 Star 93 Octane Performance tune
-Removed intake vortex generators

~60 degrees out

did 312hp and 519 ft/lbs

for reference, same dyno, a 2014 F250 with the 6.2L and intake, exhaust, and im not sure what else ran 286 HP, 322 ft/lbs.

 

[pastorwug]

Nice run, about what I hoped for at the wheels.

 

[kandewinn]

Fake News...Paperwork says it was an 8 cylinder...Just kidding about Fake News, but it really does say 8 Cylinder

 

[SilverBolt]

Are these your numbers with mods? If they are something is very wrong. Stock we a rated at 450hp at the crank. Given a drivetrain loss of about 20% puts you at 360whp. Your mods should be another 60-80whp on top of that.

 

[xrocket21]

Are these your numbers with mods? If they are something is very wrong. Stock we a rated at 450hp at the crank. Given a drivetrain loss of about 20% puts you at 360whp. Your mods should be another 60-80whp on top of that.

Some dynos read very low, some read high.

This is a low reading dyno.

This is why I pointed out that for reference, same dyno, a 2014 F250 with the 6.2L and intake, exhaust, and im not sure what else ran 286 HP, 322 ft/lbs.

 

[xrocket21]

Fake News...Paperwork says it was an 8 cylinder...Just kidding about Fake News, but it really does say 8 Cylinder

it also says 3.7L displacement

This was a diesel dyno day competition with a gas glass. It wasn't so much a careful dyno appointment with wideband 02, etc

Basically they strap you on and make 2 quick pulls, then the next guy.