Raptor Devil Run (AFTERMATH)

[mtnghost]

@mtnghost

View attachment 457459

No. Not at all. Well...definately maybe but you could only drive in a straight line

35×12.5'5 will fit stock with front on mid perch

Ok, that is what thought. What’s done to the raptor in the post? Or should I be asking who’s raptor is it and what gen is it?

 

[CigarPundit]

Or should I be asking who’s raptor is it and what gen is it?

You're talking to him, lol. It's @MurderedOutSVT 's

 

[dj30417]

You're talking to him, lol. It's @MurderedOutSVT 's

But if you have to ask what Gen you are already behind the eight ball.

 

[mtnghost]

But if you have to ask what Gen you are already behind the eight ball.

I only asked what gen due to the fact it was running 37” tyres without a problem, as per the quote in the post. Thought I was wrong about it being a first gen.

 

[dj30417]

I only asked what gen due to the fact it was running 37” tyres without a problem, as per the quote in the post. Thought I was wrong about it being a first gen.

Just yanking your chain, we do that here A LOT, you’ll get used to the joking around. I don’t know what all @MurderedOutSVT has done to his beautiful beast. The frame horns are cut off mine to make room for the 37’s and prevent rubbing.

 

[MurderedOutSVT]

I can't speak for 37x12.5 with a normal offset and say, a 9" wheel, but..

I'm on 37x13.5x20 with a 10" wheel with a huge offset. It's rediculously wide. Being the blasphemer here, I'm on a BDS 4" lift running mid perch on the springs. Shit still rubs and scrubs under near full lock.

 

[mtnghost]

I can't speak for 37x12.5 with a normal offset and say, a 9" wheel, but..

I'm on 37x13.5x20 with a 10" wheel with a huge offset. It's rediculously wide. Being the blasphemer here, I'm on a BDS 4" lift running mid perch on the springs. Shit still rubs and scrubs under near full lock.

Yeah I noticed your wheels had quite a bit of poke. Then I noticed stock LCAs and put two and two together. Lurked your entire post history and profile and all I found was your spec sheet and some bad luck with an engine. (Sorry to hear that) glad you are back up and running.

 

[MurderedOutSVT]

Yeah I noticed your wheels had quite a bit of poke. Then I noticed stock LCAs and put two and two together. Lurked your entire post history and profile and all I found was your spec sheet and some bad luck with an engine. (Sorry to hear that) glad you are back up and running.

Thanks, it was a nightmare to get a motor.

I'd really rather not have so much of the poke, it looks good but it rubs, a lot.

 

[mtnghost]

Just yanking your chain, we do that here A LOT, you’ll get used to the joking around. I don’t know what all @MurderedOutSVT has done to his beautiful beast. The frame horns are cut off mine to make room for the 37’s and prevent rubbing.
View attachment 457478

I do be asking some questions that even make me think, is this a stupid question. No worries, one day I will be able to decipher the razzing from the constructive criticism.

 

[The Car Stereo Company]

Thanks, it was a nightmare to get a motor.

I'd really rather not have so much of the poke, it looks good but it rubs, a lot.

effin brodozer