Raptor Chase /Emergency lights

[ImAllSCREWdUp]

@MDRAPTR First off, I'm in College Park so...yeah
Second - what do you think of the build quality of STL's stuff?

 

[MDRAPTR]

@MDRAPTR First off, I'm in College Park so...yeah
Second - what do you think of the build quality of STL's stuff?

I’ve had them on 3 vehicles now & through all the salt & much that is Maryland weather they’ve been great.

 

[MDRAPTR]

Which lights exactly. I have looked at few and still haven't figured out how they mount. I get drilling hole for wiring to fit to upfitters. Where are you planning to mount the rears?
Sorry, shoulder surgery, so not thinking clear and one hand typing.

here you go..hope this helps

 

[Blue Thunder]

Sorry for the delay........thanks this does help. I will update when I get things installed.

 

[ImAllSCREWdUp]

@MDRAPTR installed my Speed Turtle 3.0 Module and the visor lights and I agree, nice quality and easy installs.

 

[MDRAPTR]

@MDRAPTR installed my Speed Turtle 3.0 Module and the visor lights and I agree, nice quality and easy installs.

I e always wondered how strong those visor brackets are each light has to be 5-7 lbs right? Looks good though what’s a Speed turtle?

 

[ImAllSCREWdUp]

I e always wondered how strong those visor brackets are each light has to be 5-7 lbs right? Looks good though what’s a Speed turtle?

The brackets are single piece, powder-coated steel. I ordered the ones specifically for F150s but the kit came with universals as well. They tooth into the plastic sun visor mount trims and are very sturdy. All the hardware is 7mm, matching the size of the visor mount hardware (well thought out). The lights are only a couple pounds a piece and they dont bounce at all. Only issue I have is there's no easy way to hard wire these and maintain the pattern toggle switch. As a result, I have them running off the cigar lighter not a fan of visible wires.

The Speed Turtle is a module that plugs into the BCM and strobes the stock lights. Its programable and can be trigged by a quick double-tap on the high beam switch. There is also a lead included for a stand alone switch. I plan on reprograming it this weekend.

Speed Turtle 3.0

 

[RotorOver]

The brackets are single piece, powder-coated steel. I ordered the ones specifically for F150s but the kit came with universals as well. They tooth into the plastic sun visor mount trims and are very sturdy. All the hardware is 7mm, matching the size of the visor mount hardware (well thought out). The lights are only a couple pounds a piece and they dont bounce at all. Only issue I have is there's no easy way to hard wire these and maintain the pattern toggle switch. As a result, I have them running off the cigar lighter not a fan of visible wires.

The Speed Turtle is a module that plugs into the BCM and strobes the stock lights. Its programable and can be trigged by a quick double-tap on the high beam switch. There is also a lead included for a stand alone switch. I plan on reprograming it this weekend.

Speed Turtle 3.0

So, the Speed Turtle 3.0 works on the MY21+ trucks? The website says through 2015-2019 F-150. Looks like a great solution.

 

[ImAllSCREWdUp]

So, the Speed Turtle 3.0 works on the MY21+ trucks? The website says through 2015-2019 F-150. Looks like a great solution.

If the BCM is the same, then it will at least plug-in. Not sure about operation on Gen 3.