Rack:ONE Mounting Systems by WSI

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DocSpooK

Full Access Member
Joined
Feb 27, 2011
Posts
506
Reaction score
431
Location
TechsAzz
I need to hear from some other Rack One owners. Do you have the gap by the cab? Mine is about 5 1/4". Tight against the tailgate. @DocSpooK looks like yours has a similar gap.
Why would there be a gap? Could it really have been measured wrong by over 5"

I need Jimmy @WSI to chime in and look at my pics and tell me first why holes didn't line up and then why there is that 5"+ gap.


Yes, mine has the gap. kinda irritating, but Jimmy said the sheets are ten feet long, so he cuts them in half to get two per sheet. problem is we have 5' 6" beds, per Jimmy, would be almost twice as expensive to make one a few inches longer. :/
I did suggest putting the gap at the tailgate though, we'll see what happens.
 

Kahuna

THE MORE YOU PLAY WITH IT, THE BIGGER IT GETS
Joined
Aug 31, 2014
Posts
872
Reaction score
795
Aren't the wings that fill the areas behind the rear arches included in the base rack?

Anyone heard more about the sliding model yet? I presume if they can't keep up with orders for the standard rack it is probably a ways off.

 

WyoStorm

FRF Addict
Joined
Oct 5, 2012
Posts
3,434
Reaction score
1,849
Location
Wyoming
Not with mine.

I think the sliding option is a no go due to cost. Talk to Jimmy but even the aluminum he was shying me away from let alone the slideout option
 

subseashooter

Member
Joined
Jun 17, 2014
Posts
41
Reaction score
12
Location
Spring, Tx/St. John's, NL
Yeah, the model with the wings is sold separately from the base model without. And its a good bit more expensive. Not saying that its not worth it, but the whole thing is giving me pause. Not sure I wanna jump anymore. Frustrating because I was really stoked about this initially.
 

Kahuna

THE MORE YOU PLAY WITH IT, THE BIGGER IT GETS
Joined
Aug 31, 2014
Posts
872
Reaction score
795
Likewise, I wanted wings and sliding. Will probably go another direction now.

Thanks for the info,
K.
 

subseashooter

Member
Joined
Jun 17, 2014
Posts
41
Reaction score
12
Location
Spring, Tx/St. John's, NL
Eh, I wasn't big on the sliding. And I can see the wings being an additional expense; they require more metal and fab time, plus the extra tube and bends it requires. Totally understandable.

It's the QC issues that I'm seeing that make me nervous.
 
Top