Question - Check your roof...

[Venerous]

So, whilst inspecting the PPF install - I came across something peculiar. I looks like there's a piece of trim missing on the roof (both sides, see below) - asked the shop about it and they said there wasn't anything there when I brought it in. We checked another Raptor they had in there - same thing. There's a screw hole though... anyone else have any input on this? Is yours this way too? If there's not going to be any trim, why not cap the screw hole Ford? [please excuse the dust, I can't wash her for 2 weeks]

 

[NASSTY]

That's not a screw hole, there should be a rivet there.

 

[Venerous]

That's not a screw hole, there should be a rivet there.

Roger, thanks. Strange that both mine and the other Raptor in there both have the exposed holes.

 

[Mk1 Caddy]

The hole is the rivet.

 

[dmb359]

My 2020
That is the rivet




Sent from my iPhone using Tapatalk

 

[wheelman55]

Venerous...that is the rivet head that you are looking at. Factory correct and will not leak. Go to the hardware store and look at some rivets.

No worries.

 

[RotorHead695]

Be happy that length of trim is missing. I had problem with both of my last 2 Tacomas trim falling off.

 

[Venerous]

@Mk1 Caddy @dmb359 @wheelman55 & everyone else - yeah, I might have been a little premature in asking as I found another thread regarding this topic and a little investigation revealed the same info. My apologies and thank you for your help. Just a small freak-out. Carry on.

 

[RotorHead695]

@Mk1 Caddy @dmb359 @wheelman55 & everyone else - yeah, I might have been a little premature in asking as I found another thread regarding this topic and a little investigation revealed the same info. My apologies and thank you for your help. Just a small freak-out. Carry on.

I bought mine used and my first thought was that the previous owner cut it off. After my experiences with them, I was actually happy. It was only later that I realized Ford got it right from the get go. So no worries!