Power Lock Wiring - GEN3

[Lxg44]

Hey All
Just returned to the Raptor corral. Had a 14 SCREW went to a 17 F250 now back to a 23 37PP Raptor. Ordered the same locking Toolbox/Tonneau cover for the bed I had on my last 2 trucks. But once again need to find info on the power lock wiring so I can tap into them to lock and unlock the toolbox with the key fob. On the F250 I was able to tap into them under the driver side sill plate.

Has anyone done this on a Gen 3? Any help/advice on wire colors/location would be appreciated.

 

[Lxg44]

No one has added a power locking accessory to a Gen 3? A cap or tonneau maybe?

 

[FoxNotch]

Maybe theres a Ford Tech on here that could hook you up with a wiring schematic.

 

[The Car Stereo Company]

 

[Lxg44]

Thank you! Much appreciated

 

[JayRods]

Now I'm interested in this one. What are you using to lock your toolbox ? I want to lock my Dimandback cover with the key fob. I made a mechanical mechanism to lock it it when the tailgate is closed, but this would be even better.

 

[Lxg44]

Nice setup! I ordered an American Truck box combination Tonneau with toolbox. The power lock actuators are already a part of the toolbox.

 

[warraptor]

I bought a used stop. Has a power lock on it as well, green and blue wires only 1 of each. What was your wire situation and how did you solve it? I’m thinking tapping into the lock motor and passenger unlock motor that OP posted?