Power detract mirrors?

[nicul15]

this is the biggest Dbag thing they've done. On the non raptor F150s they offer this option on much lower trim levels. with this truck you can spend $55,000 and you can't pay extra only for power folding mirrors...on a $55k full size truck, likely the only size vehicle that really needs them...

 

[rapetor17]

No, I added over a grand in mirror options just to get 360 camera and still no power folding ><

Same here. $60000 truck and no power folding mirror. My 2008 gmc Sierra all terrain has them

 

[nicul15]

maybe they figure the fenders are so wide that the mirrors being folded barely make a difference? regardless i need to fold to get in and out of the garage, which would be everyday. now i have to spend $10k to not have to get out of the truck to fold the passenger mirror.

 

[Trick.Raptor]

maybe they figure the fenders are so wide that the mirrors being folded barely make a difference? regardless i need to fold to get in and out of the garage, which would be everyday. now i have to spend $10k to not have to get out of the truck to fold the passenger mirror.

Get a hook for the end of the broom, problem solved.

$7.84 at Wal*Mart.

 

[Chris@FreedomMotorsports]

Oh wow! No power folding mirrors? That's insane. Especially when both my 11 and 14 have them.

THE RAFFLE PRIZE PACK IS NOW WORTH $650 CHECK IT OUT BELOW &HELP A WORTHY CAUSE

http://www.fordraptorforum.com/showthread.php?t=49345

 

[mwakgp]

Oh wow! No power folding mirrors? That's insane. Especially when both my 11 and 14 have them.

THE RAFFLE PRIZE PACK IS NOW WORTH $650 CHECK IT OUT BELOW &HELP A WORTHY CAUSE

http://www.fordraptorforum.com/showthread.php?t=49345

They're available just only as part of the luxury group.


Sent from my iPhone using Tapatalk

 

[Chris@FreedomMotorsports]

Gotcha

THE RAFFLE PRIZE PACK IS NOW WORTH $650 CHECK IT OUT BELOW &HELP A WORTHY CAUSE

http://www.fordraptorforum.com/showthread.php?t=49345

 

[SilverBolt]

Rather than bucking up for the 802A you could just hit the parts department and buy them and install yourself.

 

[nicul15]

Rather than bucking up for the 802A you could just hit the parts department and buy them and install yourself.

i took a quick google into this and for the last gen truck the hardware is $1G, and i would have to use a VIN from a truck that had factory installed folding mirrors plus almost every option my truck had and enter that in the ASBUILT data. using a 802a ASBUILT VIN might screw up a 801a because they are so different.

I don't have too much experience in this, but just connecting dots using what i learned while owning my '14 GT. if someone can chime in, that would be great.

 

[SilverBolt]

i took a quick google into this and for the last gen truck the hardware is $1G, and i would have to use a VIN from a truck that had factory installed folding mirrors plus almost every option my truck had and enter that in the ASBUILT data. using a 802a ASBUILT VIN might screw up a 801a because they are so different.

I don't have too much experience in this, but just connecting dots using what i learned while owning my '14 GT. if someone can chime in, that would be great.

Here is a quick hack that gets around the reprograming.

remove door panels, remove old mirrors,on the passengers door mirror connector, find pin #'s 7 violet/brown and # 16 green/violet and splice a wire to each. Run those wires over to the drivers door.( this may require drilling a hole or 2 to get them there). When you get to the drivers door find the same colored wires and pin #'s on the mirror connector ,and splice the 2 wires from the passenger side to the corresponding wires on the drivers door . At this time you will also need to pigtail a wire from the #7 wire to the # 6 wire on the switch which is a yellow/orange, and a wire from the # 16 to the #4 on the switch which is gray/brown.Wiring them this way will eliminate the need for the relay and a flash at the dealer, but will also eliminate the memory function.