positive experience with RPG

[The Car Stereo Company]

wanted to share a good experience i had with the guys at RPG. i tore out my passenger side fender liner about a year ago and with the offroading i do, i kept tearing it out since it was deformed and would not go back into the original position. then recently i tore out my drivers side. so both my fender liners are shot. i started looking around and decided to contact corey last week to see if he had a set. guess what just got delivered to my shop this morning? yep, 2 fender liners. i want to thank the rpg guys for getting these out to me so quick. as i am leaving for colorado in the next few weeks i wanted to have my truck all fixed up and ready to go. knowing these guys on a more personal level i can say that these are a great group of guys and i wouldnt hesitate to do business with them again. rpg has always been very hospitable at all the trr events and when i needed help, they came through.

so thanks RPG for getting me set up.

 

[f16YODA]

x 100 beeellion!

- YODA

 

[Madcowranch]

Won't find any better than Corey.

 

[FN-2187]

Not to hi-jack, but I called this morning and spoke with Corey regarding some heims, spindles, and lower uniballs for my truck and received EXELLENT service from him. Unfortunately I was in a bit of a rush but Corey took great care of me. Got my order together quickly and kept me updated on what was going on. Called back a couple hours later and Also dealt with Andrew when I had a quick question about my order and he was very knowledgable and polite.

Thank you, RPG.

 

[MILRTME]

I haven't dealt with @RPG much really "YET" but I have talked to them and they seem great! I am hoping that after TRR16 I can start my suspension mods with RPG. So this is all good to hear!

Thanks @2014RubyRed
Sent from my iPhone using Tapatalk

 

[2014RubyRed]

I haven't dealt with @RPG much really "YET" but I have talked to them and they seem great! I am hoping that after TRR16 I CAN start my suspension mods with RPG. So this is all good to hear!


Sent from my iPhone using Tapatalk

Fixed it for you!!!

 

[Raw Horsepower]

With all the vendors I have talked with Corey at RPG is the only one who takes time to answer questions, give advice and find what you really want. He will give help even when you do your own thing. Other vendors I have talked with are short an answers and don't seem to want to sell anything. There are great products out there but Corey is far and above on customer service and knows how to run a business. After talking with more vendors at the Mint 400 it just confirmed what I have already said. I'll continue to do business with RPG

 

[Raptor Embroidery]

Corey is awesome! I snapped an axle shaft at TRR and Ford had them backordered for 3 months. I called Corey and luckily, he had 2 sitting in the shop that would fit mine! Less than a week later, my Raptor was back on the road, all thanks to Corey!

 

[marilynsride]

nice to see someone else has the same problem

wanted to share a good experience i had with the guys at RPG. i tore out my passenger side fender liner about a year ago and with the offroading i do, i kept tearing it out since it was deformed and would not go back into the original position. then recently i tore out my drivers side. so both my fender liners are shot. i started looking around and decided to contact corey last week to see if he had a set. guess what just got delivered to my shop this morning? yep, 2 fender liners. i want to thank the rpg guys for getting these out to me so quick. as i am leaving for colorado in the next few weeks i wanted to have my truck all fixed up and ready to go. knowing these guys on a more personal level i can say that these are a great group of guys and i wouldnt hesitate to do business with them again. rpg has always been very hospitable at all the trr events and when i needed help, they came through.

so thanks RPG for getting me set up.

nice to see im not the only one ripping out the inner fender wells, i actually had one warrantied and then demolished that one last weekend, wondering what the fix might be, not sure i want to go 5k on fiberglass fenders and inner wells

 

[bstoner59]

Hammer the pinch welds over and use self tapping screws in the pinch weld to hold the liners in place. Corey taught me that one because he knows I'm too cheap to buy nice fender liners