Pistol mount...

[Slacker]

For those of you using 3M VHB tape I highly recommend using the 3M Adhesion Promoter. If your firearm is loaded and the tape gives way you could have a ND.

 

[JoeSC]

I've got a really strong magnet I put into the side of my console when I added lightning cable extensions in the console. I have yet to take the minute to cut out the leather so I can slap my gun against it without ruining anything. I'll attach that with some 3M whatsit. Basically it'll just be a thin leather pad on the side by my knee.

 

[azcoov]

When you're done with the pistol mount...

 

[Hburgrap]

Nice. Thanks for posting. The ole hi point will mount nicely on that.

Fail. Downfall of a 7 lbs pistol I suppose

 

[hpschrank]

I use a Vara Safety II with a bracket I made that bolts to the front seat mount hardware. So no drilling into the vehicle. A little pricier option but a little more secure as well. The biometrics have…so far…worked quite well for quick/reliable deployment.

 

[cmb396]

I had a similar one in the center console with 3m tape. It fell off after a few weeks. I'm tempted to put some wood screws to help but I'd probably put a screw through a flux capacitor or something.

I might get some really short screws that are only slightly longer than the width of the magnet. A little help would probably keep it in place.

I had a magnet screwed into my last truck that held tight for 6 years. It was a colorado, so i didn't give a ***** about screw holes in it, and would rather not do it to this truck. Then again, it held up for 6 years in my last truck and is now someone elses problem, same as the holes in my new truck in 5-6 years, lol

 

[cmb396]

This is what I went with. They have Gen 3 holster also The link is for gen 2.

Ford Console Holster – F150/250/350/450, Gen 2 Raptor and Expedition

Created out of an unwillingness to compromise, the F150/250/350/450 & Expedition Console Holster provides effective and non-invasive firearm storage by utilizing the factory storage track inside of the center console. An exceptionally clean installation provides a sturdy mounting solution...

consoleholster.com

I do like that, however, I don't like the idea of having to open the console in an emergency situation, nor lifting the top trays out to get something underneath (on a rare occasion albeit).
Looks well made.

 

[TXRaaptor]

I use a “grey man tactical” mount in the lid of the centre console that I can mount a holster on.

 

[Ellison3]

Man… all those options you guys posted are nice!!!

 

[DevilisintheDetail]

When you're done with the pistol mount... View attachment 396363

I don't understand this. Seems like a pita to get to anything. Not to mention it limits what you can store back there height wise. I'd almost prefer to get a sliding deck box and custom cut out foam inlays so nothing gets jostled around and it's secure.