Performance Build in process

[Cody Dawson]

@Cody Dawson
we need/want more....

Of course, however I’m juggling 10-15 engine builds at one time. This project will start ramping up soon, the block is being prepped for honing.

 

[Cody Dawson]

Finally in the Rottler CNC hone.

 

[Cody Dawson]

On to cylinder head work, measuring all components and prepping to order some new parts.

 

[Jonny V]

What mods are you planning to make on the heads? Are you swapping cams out too?

 

[Cody Dawson]

What mods are you planning to make on the heads? Are you swapping cams out too?

This set will be getting upgraded valve springs. Sticking with oem cams, no need for any other changes. Most of the improvement will come from the valve seat and throat area. Stay tuned

 

[Cody Dawson]

Crank has been digitally balanced to within .5 grams. An ATI super damper will be installed on this final assembly, the damper doesn’t get spun up on the balancer.

 

[Jonny V]

This thread is the best ever!!!

 

[Cody Dawson]

Checking over the Manley I-beams and resizing the big end to make it actually round at the desired stretch/torque values. Getting close to assembly time for the bottom end. Bearings will be sent out for Coatings.

 

[Cody Dawson]

For everyone following, I have two 6.2 engines in process now. That being said, ran into some issues with lack of valve train parts so I’m waiting on production to start on my own setup. Lots of R&D going on with the cylinder heads and I’m excited to see the final results. Stay tuned.

 

[Cody Dawson]