I have a new 2019 Raptor, ordered the 2019 Perimeter Plus and Bajamod bracket, installed in truck.
After install i pressed the Start button (without foot on brake) twice on and off.
Then started my truck. shut it off, locked the doors with a double key lock press and horn beep. put the keys in the house. came back out to locked truck and nothing happens when i rock the truck or shake it.
Shouldn't the alarm go off? Does it take time for the Perimeter Plus to be recognized by the truck?
From a page ago:
"Okay; I got a new module and hooked it up and it WORKS!
These are the steps to make it work on a 802A Raptor:
Disconnect battery.
Connect module (without jumper).
Sensitivity at 60% to 80%.
Re-Connect battery.
Get in vehicle and shut the door (key fob in your pocket).
(Do Not step on brake) push start button on, push start button off.
Doors will lock and then unlock (This has to happen, or it did not recognize the module, if this does not happen, start over).
Depress brake and start vehicle.
Shut off vehicle shut door and lock with key fob.
Take your keys and put them in the house (far away).
ALL of these steps are necessary.
Hit the A pillar with your palm, the horn will report a short blast."
Did you disconnect battery? Did your doors lock then unlock?
Hope this helps.