Nitri Pressure in rear FOX 3.0 Shocks

[nbg-mustang]

Hi all,

does not found anything about that so maybe you know it.

What i need to know is, if it is possible to adjust the Nitro Pressure in a rear Fox Shock 3.0. And if it is possiple if that make any difference in the ride of the truck and comfort?

Thanks to all.

Daniel

 

[svc]

Hi all,

does not found anything about that so maybe you know it.

What i need to know is, if it is possible to adjust the Nitro Pressure in a rear Fox Shock 3.0. And if it is possiple if that make any difference in the ride of the truck and comfort?

Thanks to all.

Daniel

Keep them at 200psi. You should make all your adjustments via tubes or valving to get the ride you are looking for.

Jarrett

 

[RPG]

Daily Driver fee free to keep them at 150... Only when you really increase shaft velocities will you need 200PSI. Most Raptor Runs will have someone with N2 so you can increase pressures when you get to the events. Just make sure ahead of the event. Then drop them back to 150 for the drive home. Simple & Easy. We offer an air control valve if you need one. https://www.youtube.com/watch?v=EW8Cuc7VoQg


This will soften daily driving. What do you have your BP tubes set at?

 

[Deleted member 12951]

Daily Driver fee free to keep them at 150... Only when you really increase shaft velocities will you need 200PSI. Most Raptor Runs will have someone with N2 so you can increase pressures when you get to the events. Just make sure ahead of the event. Then drop them back to 150 for the drive home. Simple & Easy. We offer an air control valve if you need one. https://www.youtube.com/watch?v=EW8Cuc7VoQg


This will soften daily driving. What do you have your BP tubes set at?

Cory, does the air control valve only work on Fox shocks or does it work on ICON's also?

 

[RPG]

Works on all shocks equipped with a Schrader valve. [emoji106][emoji2]


Sent from my iPhone using Tapatalk

 

[nbg-mustang]

Thank's all for your help.
@RPG not very sure but I think the low and fast Speed Compression stay complete on +, -1 or 2 click's to -
The rebounce is 3 clicks from complete - to +

Tryed it with a few different settings but don't know what I adjust there because I don't understand how the shocks work.

What is the best setting dor jumping and offroading and what is the best one for comfort ride?

I don't know if I have a shredder valve, I order the Fox3.0 with QAB at WOG Offroad, with deaver +3 leaf's. I tell James that i need the pressure adjust tool to from you.

Daniel

 

[RPG]

Thank's all for your help.
@RPG not very sure but I think the low and fast Speed Compression stay complete on +, -1 or 2 click's to -
The rebounce is 3 clicks from complete - to +

Tryed it with a few different settings but don't know what I adjust there because I don't understand how the shocks work.

What is the best setting dor jumping and offroading and what is the best one for comfort ride?

I don't know if I have a shredder valve, I order the Fox3.0 with QAB at WOG Offroad, with deaver +3 leaf's. I tell James that i need the pressure adjust tool to from you.

Daniel

Give me a call tomorrow to discuss your needs. Everyone is different. [emoji106][emoji2]


Sent from my iPhone using Tapatalk

 

[MatMan]

Thanks again for the ACV video (recorded on my bday, on which I received my first raptor speeding ticket). I'll get my ass out there after work and check pressures (on all 6 shocks if I'm feeling ambitious)


And if the bumps are low I may consider topping off w/Co2, even though they have n2 in them.

 

[nbg-mustang]

@RPG thank you for the offer. The problem is that my english is not good enough to listen if a other one speak on the phone. I only can discuss with you by E-Mail, so I can explain you what "settings" I need. Do you have a personal Mail Address?

 

[RPG]

Thanks again for the ACV video (recorded on my bday, on which I received my first raptor speeding ticket). I'll get my ass out there after work and check pressures (on all 6 shocks if I'm feeling ambitious)


And if the bumps are low I may consider topping off w/Co2, even though they have n2 in them.

As long as it is "Ideal gas" and or dry air, you will be fine. [emoji106][emoji2] your not getting your bump up to 400 degrees Fahrenheit. [emoji12]


Sent from my iPhone using Tapatalk

---------- Post added at 11:56 AM ---------- Previous post was at 11:55 AM ----------

@RPG thank you for the offer. The problem is that my english is not good enough to listen if a other one speak on the phone. I only can discuss with you by E-Mail, so I can explain you what "settings" I need. Do you have a personal Mail Address?

[email protected] [emoji2]


Sent from my iPhone using Tapatalk