Need help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Donovan

FRF Addict
Joined
Aug 10, 2019
Posts
4,690
Reaction score
4,581
Location
DC
I wish i could help with the swirls but that last time I tried that shit, I burned a hole in my clear LMAO!
 

GLT

Full Access Member
Joined
Sep 28, 2016
Posts
154
Reaction score
107
Location
DFW
The best single stage polish IMO is Sonax Perfect Finish. It's a medium cut that finishes like an ultra fine. That said, if the VSS with an orange pad didn't get those out (I can't really tell how deep they are in the photos), then the Perfect Finish may not either and you may have to use a heavy cut. If so, I've had great results from Rupes DA Coarse -- it has successfully removed deep clearcoat scratches for me, and those swirls you have will be light work for it. I'd try the Perfect Finish on one panel, see how it looks, and if it doesn't get them, go Rupes DA.
 
OP
OP
raptordoke

raptordoke

Member
Joined
Feb 22, 2024
Posts
13
Reaction score
3
Location
Lakeland, FL
Thanks!! I may try these out … and I am in FL … green swamp and richloam are in my backyard and Ocala isn’t too far away
 

MDJAK

FRF Addict
Joined
Feb 23, 2019
Posts
5,082
Reaction score
7,292
Location
NY
If you had no success first time around, I'd be leary of trying again. if it kills you as you say, then take it to a professional and maybe consider PPF. I find it best not to look too close.

The first set of pics look great.
 

OEMPlus Raptor

OEM preferred....
Joined
Aug 17, 2020
Posts
1,061
Reaction score
1,133
Location
Oxnard CA
I vote for Sonax Perfect Finish as well. Try it with a Rupes yellow foam pad or maybe there yellow wool pad. Then little by little start upping your game and start tossing the Chemical Guys stuff in the trash.
 

Keshka

Full Access Member
Joined
Feb 25, 2022
Posts
560
Reaction score
995
Location
Summerville, Oregon
also from a similar problem on a black Pontiac Bonniville. Use a softer finish wax to get rid of swirl. Hard base wax/coating then soft wax finish coat next day
 

NinjaRaptor

Full Access Member
Joined
Apr 19, 2023
Posts
178
Reaction score
203
Location
Florida
Thanks!! I may try these out … and I am in FL … green swamp and richloam are in my backyard and Ocala isn’t too far away

Congrats on the truck... join the FL Raptor group in FB. Raptor Run in Ocala runs every other month or two months depends on organizer.
 

Pnwrider

Member
Joined
Nov 4, 2018
Posts
32
Reaction score
34
Location
Pnw
Skip the foam pads and go to straight wool. I have gotten amazing results from rupes yellow wool pad and coarse/fine finish depending on depth of scratches/swirl marks. I have tried just about everything over the years (da, forced rotary, Adam’s, chemical guys, griots, etc) and the rupes system can make any novice look like a pro. My go to now is the yellow wool pad and finish with favorite wax/sealant.
 
Top