Need advice/anyone run this: Vision X xtreme emitter prime 20" bar & BD squadron fogs

[FastEddie]

Curious if anyone runs this combo. Thinking a spot in the light bar and wides in the squadrons, one set white and one amber. From what I can tell these are one of the better units of each of their type.

Any issues with getting color temperature match or pattern overlap?

TIA

 

[JRaptor11]

Love my 20" VisionX bar. I have LED cannons on my hood and barely use them now due to the 20" bar being so freaking bright. I'll get James in here from Alternative Offroad. He should be able to answer all your lighting questions.

 

[AlternativeOffroad]

Thanks Jason!! To the OP, yes the VisionX bar is about 17,200 lumens and the squadrons are about the same with all 4 lights. However, the Baja Designs kit is closer to 5,000k where the VisionX is 6,000k so there is a different color temperature between the two. If you are picky it will be apparent. Something closer to the VisionX kit would be the Rigid D2 kit. Those both share the same color temperature. But you really cannot go wrong with either setup. Give me a call tomorrow at the shop and I'll get you setup with something!

 

[Huck]

loved my 20" extreme emitter enough that i swapped it out for a 30 when i got my winch.

 

[FastEddie]

Thanks guys, the Vision X bar seems like the bomb.

Alternative, on your message the Rigid D2 would match better, thanks for the input...

Thanks Jason!! To the OP, yes the VisionX bar is about 17,200 lumens and the squadrons are about the same with all 4 lights. However, the Baja Designs kit is closer to 5,000k where the VisionX is 6,000k so there is a different color temperature between the two. If you are picky it will be apparent. Something closer to the VisionX kit would be the Rigid D2 kit. Those both share the same color temperature. But you really cannot go wrong with either setup. Give me a call tomorrow at the shop and I'll get you setup with something!

In addition to my original question - anyone ever run Vision X xtreme emitter prime bar with Rigid D2's? Any comments on how the light color temperature and the pattern matched up?

 

[AlternativeOffroad]

Here is the D2 driving then an 11" VisionX Xmitter. I turned the brightness down on the camera as much as possible to eliminate other light sources so obviously the lights look much dimmer than they really are but it gives you an idea of color temperature