Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Figured I would update with my just installed 40” curved LED light on the front bumper. I didn’t want to drill into the front bumper so I used the mounting brackets from ZRoadz and paired those with a Rough Country - 76240 - 40-inch Dual Row X5 Series Curved CREE LED Light Bar.
https://www.amazon.com/dp/B01D5HMCSC/?tag=fordraptorforum-20
The install was pretty straight forward and I’m pretty happy with the results. The front camera is half blocked but I think I can deal with that. If I change my mind I’ll do something different or relocate the camera. I definitely have plenty of front facing light now!
Thats a proper garage... Details on the 997 TURBO!!!
Looked at a YouTube video and some of the threads on the forum on got them all wired up. I may circle back and replace the connectors with something more robust and then shrink wrap the taped areas but overall it works great and I am happy with the result.
A few pics I took along the way:
It's a good idea to mark what wires goes where!
I took the plastic cover off over the radiator area and the wires tucked in there nicely.
I had some connectors lying around so I just used them for now and they allow me to easily disconnect and reconnect if needed.
The unused ground is right there in the area so I just used that.
The final product (for now anyway).
I wired each matched pair (inside, middle, outside) to a separate switch. So 3 switches total for the 6 lights.
They work!