BSouders80
Full Access Member
I’ve had the moritomo xb’s in my 14 screw for a few months. My passenger side headlight will hyper flash the turn signal when in drive with headlights off. When I use the turn signal, the turn signal flashes as it should.
I have my DRL set to be on with forscan and all hyper flashing off with forscan.
With only the turn signal harness plugged in, light will hyper flash in drive. I cleaned the plug on both sides with contact cleaner and blew out both connectors until dry. The pins and contacts all look good.
I swapped the driver side/passenger side lights. With only the turn signal harnesses plugged in, it stops on passenger side with driver side light plugged in. With passenger side light plugged into the driver side, hyper flashing follows the light.
I tried wiring in a resistor on the troublesome light. No change.
So I am down to calling Moritomo for a warranty claim. Any other thoughts? Lights are about 6 months old.
Work around is to kick on the headlights when it’s light outside. Won’t flash with headlights on.
I have my DRL set to be on with forscan and all hyper flashing off with forscan.
With only the turn signal harness plugged in, light will hyper flash in drive. I cleaned the plug on both sides with contact cleaner and blew out both connectors until dry. The pins and contacts all look good.
I swapped the driver side/passenger side lights. With only the turn signal harnesses plugged in, it stops on passenger side with driver side light plugged in. With passenger side light plugged into the driver side, hyper flashing follows the light.
I tried wiring in a resistor on the troublesome light. No change.
So I am down to calling Moritomo for a warranty claim. Any other thoughts? Lights are about 6 months old.
Work around is to kick on the headlights when it’s light outside. Won’t flash with headlights on.