Modifications Complete

[Keith88]

You did all that and left the antenna….

 

[figure1a]

Holy shit that carbon fiber hood scoop and side vents are $$$$$. Like Porsche prices $$$$$.

 

[kickin45]

What’s the leather console cover look like?

 

[djcurrie1]

Did you have the wheel arches, bumpers and lower cladding painted or vinyl wrapped? Thinking of painting mine but would still want ppl vinyl on the front bumper at least...

 

[JBTAC]

That looks really great! How difficult were the hood vent and side vent installs? I've been eying the "extremeonlinestore" carbon side vents and "R" style hood vent, but I wasn't sure if it would be a PITA to do the side vents.

I really dig your wheel and tire setup and those tail lights as well. Well done sir

Hood vent: https://www.ebay.com/itm/3261608408...d=link&campid=5338805043&toolid=20001&mkevt=1
Side vents: https://www.ebay.com/itm/3261763799...d=link&campid=5338805043&toolid=20001&mkevt=1

 

[John813]

Any reason for the 18's over 17's?

Future bigger brake install?

 

[OEMPlus Raptor]

Keep an eye on the CF pieces, I believe Ford sources them from Anderson Composites. Mine faded quickly and turned yellow, for what they cost they shouldn't do that. I was told I should've had them re-cleared with a better clear (automotive). I went back to stock parts, lesson learned (stay away from CF).

 

[JBTAC]

Keep an eye on the CF pieces, I believe Ford sources them from Anderson Composites. Mine faded quickly and turned yellow, for what they cost they shouldn't do that. I was told I should've had them re-cleared with a better clear (automotive). I went back to stock parts, lesson learned (stay away from CF).

Most carbon fiber will yellow over time when exposed to UV rays. A thin layer of ceramic coating should prevent it from yellowing for several years, or alternatively you can wax and polish frequently

 

[TheC-Don]

I’ve finally finished the mods to my ‘24 801a to make it look like “I” think it should come from the factory. (I know there will be dissenting opinions and that’s cool.)

I post to share with those who are considering similar updates. I’m happy to share my experiences, vendor information and opinions (without trying to belittle you or tell you to use the search function).

37x12.5x18 Nitto Ridge Grapplers
18x9 Fuel Rebel 6 Wheels
1.5” RPG Leveling Kit
ProTrax Retractable Tonneau Cover
BEDSLIDE Bed Slider
Tinted Windows
AVS Vent Shades
WeatherTech Floor Mats
Ceramic Coating (metal, wheels, windshield and plastic)
Color Match Flares, Front and Rear Bumper and Side Bed Extensions
Ford Performance Carbon Fiber Scoop, Vents and Tailgate Applique
Husky Rear Well Liners
Line-X Skid Plate
TuffSkins Nameplate Inserts (Color Match)
Smoothed and Color Match Sideview Mirrors
Lower Front Bumper Grille Insert
Morimoto Smoked Tail Lamps
Diamond Tucked Leather Console Cover
US Flag Decals on Bedsides

I've been thinking about doing the same lower grille insert. Can you tell me what parts were needed to pull that off? Looks great!

 

[BigBlue20]

Enjoy it! Not my taste but that’s not important. To me it looks more like a custom Platinum or Limited. I do however, also have a power retractable tonneau. Well done!