Lug nut Torque

[Azholley]

Believe someone posted up a picture out of the owners manual that the torque is 150ft lbs on the Gen2 also.

Can you post where in the owners manual that it shows 147?

Owners manual does say 150 idk where he got that from


Sent from my iPhone using Tapatalk

 

[Ironhorse07]

http://www.fordservicecontent.com/F...picHRef=G1609531&div=f&vFilteringEnabled=True or 150.462 lbft.

 

[1phatstang]

Believe someone posted up a picture out of the owners manual that the torque is 150ft lbs on the Gen2 also.

Can you post where in the owners manual that it shows 147?

My local dealer's techie told me 147. He is a certified Ford Senior Master Technician. I'll take his word any day. Besides, there's barely any difference between 147 and 150 ft. lbs. We're splitting hairs.

 

[Ironhorse07]

My local dealer's techie told me 147. He is a certified Ford Senior Master Technician. I'll take his word any day. Besides, there's barely any difference between 147 and 150 ft. lbs. We're splitting hairs.

Never mind what Ford printed in the manual...

 

[Azholley]

My local dealer's techie told me 147. He is a certified Ford Senior Master Technician. I'll take his word any day. Besides, there's barely any difference between 147 and 150 ft. lbs. We're splitting hairs.

[emoji23][emoji23]. That's hairs that I'd rather not be splitting going 70 in the desert. I'm a master at reading the manual it says 150.


Sent from my iPhone using Tapatalk

 

[JetDriver480]

3ft lb of torque I am not too worried on my drive to the local watering hole

 

[dewalt]

Most homeowner torque wrenches will not be within 5 %. When were they last calibrated?

 

[cmacclel]

you are suppose to re torque aluminum wheels after the first few thousand of miles. They settle and loosen up slightly. I think 100ft lbs is probably still good to go.

Yup that's what everyone says yet I've never seen one loosen in my almost 30 years of driving and always use a torque wrench on my wheels

 

[gwpfan]

Mine were less than 150, actually closer to 100 after just over 1000 miles...add front PDP mud flaps this weekend...Damn re-torqued to 130...have to notch it up a few more.

 

[ChiefMachining]

I'm seeing the 150 ft/lb as well..