lowering shocks

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

giffordt

Full Access Member
Joined
Jan 19, 2011
Posts
164
Reaction score
34
Location
CT
Is the garage height accurate? I've found most height restrictions are on the conservative side. More often than not, the height restriction refers to the lowest point in the entire garage, whether it's a pipe or signage, etc. My work garage says 6' 7" and I clear the "headache bar" by about a half inch on mid-perch. Everywhere else in the garage I have at least 2 inches of clearance. Worth checking out before going through the hassle/expense of changing the Raptor's engineering.
 

Maxx2893

Rock and Roll Offroad
Supporting Member
Joined
Mar 13, 2011
Posts
5,942
Reaction score
1,181
Location
Burleson, TX
Tizzle, don't mess up my deal man, lol.

But seriously man, If your in the DFW area or not far from it. My trade is legit. I'd like the higher springs and you'd like the lower springs.
 

ICONRep

Supporting Vendor
Supporting Vendor
Joined
Aug 17, 2011
Posts
387
Reaction score
729
Location
Riverside, CA
I AGREE with RAPTIZZLE

A longer shakle just might give you the clearance you need and not hurt the Raptor Suspension or ride quality.

Would lose a bit of up travel which is lacking already, but sometimes you just have to deal based on the circumstances right.
 
Top