Looking for some recommendations; lift kit, offset kit, seat covers, etc.

[zachnicodemous]

My 2023 Raptor 37 package got a build date for October 10th 17th so now I am starting to plan out some basic mods and looking for recommendations:

• Seat covers; I have a 1 year old toddler so seat covers are a must. My "no food in the truck" rule will go out of the window pretty quickly I am sure. Are there any that are perforated and allow the heated/cooled seats to work properly? If not, what is best? My truck is black so I'm going for a black/red color scheme.
• Lift; I want the truck leveled and maybe a 1 inch lift. Open to what works best though. Are RPG perch collars a good option? If so, what do I want to do front/back to get it both level and lifted?
• Offset; I don't know much about this subject so might end up sounding stupid. My 2018 Raptor fits in my garage but it's tight on the width; I get maybe 1.5 to 2 inches clearance on either side. I was hoping to slightly widen the wheel stance. Is there some kind of offset kit I can do or do I have to change the wheels? If so, links would be useful.
• I am planning on doing a Stek Dynomatt Matte wrap on the entire truck, paint correction and ceramic coating. I offroad quite a bit here in Montana and lots of gravel roads. My 2018 has taken a beating so I am hoping the wrap will provide some protection. Plus it'll look badass in matte. Looking for opinions on if it's worth it. The local installer can do it for $7500 so it's not too bad!
• Mud Flaps; what are the best options here? I'm hoping this will do some work (along with the PPF) on gravel/dirt roads to prevent rocks from flying up and causing paint damage. Lots of gravel roads around here. I know it's going to take damage just as my 2018 has, but just want to mitigate it.
• I want to black out the headlights, brake lights, etc etc. Looking for best options.

Any other basic mods that anyone would recommend of the bat?

Thanks in advance.

 

[tabvette]

I can't speak for all the questions, but the rok blokz are fantastic. I also went with xpel on the front lip of the hood and the bottom of the truck infront of the rear wheel arch that flares out

 

[Nex]

No lift. Perch collars or springs.

I had 20s with 37s and zero offset on my Gen 2. Looked great but might not fit in your garage.

Add all weather mats and a Cobb with Goosetuned to your list.

 

[zachnicodemous]

No lift. Perch collars or springs.

I had 20s with 37s and zero offset on my Gen 2. Looked great but might not fit in your garage.

Add all weather mats and a Cobb with Goosetuned to your list.

I am planning on a Goosetune once he releases them; I don't think its been cracked yet. My garage is really tall, so don't expect any height issues; width is the only area where its a little tight as on my Gen 2 which is bone-stock, I have only 2 inches clearance each side of the door when driving through. Plenty of space in the garage itself!

 

[Nex]

I was talking about width (giggity) not height. The zero offset wheel poke is 1"-2" per side.

 

[zachnicodemous]

Sorry if this is a stupid question, but is "zero offset" how it appears standard when you put 37s onto a Gen 2? I.e. with no offset kit added? I know nothing about the subject so that probably does sound really dumb.....

In pictures of the Gen 3 with 37 package, it doesn't look like the wheels stick out this much.