Line-x rear wheel wells

[Wilbur]

Nice! I called 2 or 3 shops here in FL, including one I've done business with before, and no one would touch them. I gave up.

 

[BaseModelRaptor]

I'll do this eventually. I agree, the Husky liners suck and were so misshaped that I couldn't even get them in properly.

How much did it cost?

I didnt have an issue. Maybe it was the installer?

 

[daytona1783]

I didnt have an issue. Maybe it was the installer?

Negative. I’ve installed two sets with no problems on my other F150s. I’d say poor quality control is to blame. It’s very hit and miss.

 

[BaseModelRaptor]

Negative. I’ve installed two sets with no problems on my other F150s. I’d say poor quality control is to blame. It’s very hit and miss.

No sets on Raptors? Yup the installer.
There's a huge thread of people who have done it. Seems like people are getting stuck around the shocks. Personally I prefer the tight tolerance.

 

[daytona1783]

No sets on Raptors? Yup the installer.
There's a huge thread of people who have done it. Seems like people are getting stuck around the shocks. Personally I prefer the tight tolerance.

The shocks weren't the problem. It wasn't cut correctly for the OEM fender flares and they were warped on the edges, causing the flares to be pushed out about 1/4" from the body.

Since you were in the garage with me, how come you didn't guide me through the process? Could have saved me a phone call....

 

[BaseModelRaptor]

The shocks weren't the problem. It wasn't cut correctly for the OEM fender flares and they were warped on the edges, causing the flares to be pushed out about 1/4" from the body.

Since you were in the garage with me, how come you didn't guide me through the process? Could have saved me a phone call....

I don't think garage help was an option.

• Phone-a-Friend. ...
• Ask the Audience (Audience Poll) ...
• Ask the Expert. ...

Maybe next time.

 

[HighlineRaptor]

with some quality prep and drape work, you can use flex seal and a sealer with same results for about $200 cheaper

 

[Mj1anderson]

I didnt have an issue. Maybe it was the installer?

$275 for the rears.
I'm very happy...

 

[BaseModelRaptor]

$275 for the rears.
I'm very happy...

$90 and so am I.
If I still lived up North I'd do the LineX but down here the liners are sufficient and easier to clean.

 

[Oldfart]

I was VERY happy with the results of the Line-X on mine. I'll never forget when the dealer called to tell me my truck came in and I first saw it, THE WHEEL WELLS LOOKED PINK!!! WTF! It was a super light coat of Race Red, almost like just overspray, on the wells, and it looked freaking pink! I was already having it done 2 days later. I like that in the salt area where I am, you aren't trapping salt spray with a plastic liner, and then you can't really clean it off very well with liners after snow runs either. I would do it again for sure on another truck.