TheJoker
FRF Addict
So, I just finished installing my front bumper. I welded additional plates/brackets for lights and one for the license plate bracket. I bought the Sto-N-Show bracket which I mounted on the center bracket. I then drilled a hole in the tube and threaded a hollow rod through it, which I then made into a release pin. It sounds complicated, but it was pretty simple and the results are awesome. The plate just slides in and locks in place. Then you pull the spring loaded pin about a 1/4 inch and the plate slides out. There are 2 3/8 inch holes in the top center of the skid plate, which you can barely see.
Attachments
Last edited: