LED Headlight Connector Type

[fidds22]

Does anyone know what the LED headlight connector type is? I want to buy a "Y" adapter, so I can plug in the factory LED light, and then plug in my LED light bar into that "Y" connector so it turns on with high beams. Thanks

 

[fidds22]

Hmmmm

 

[shelteredraptor]

Don't think you want to add that amperage to the headlight circuit. Maybe figure a way to add a relay to it?

 

[J.Bodolay]

Don't think you want to add that amperage to the headlight circuit. Maybe figure a way to add a relay to it?

Agreed. If you want to use a pilot relay you can tap into the wiring at either headlamp assembly. (VT-OG for the Right HB or GY-BN for the Left HB).

Power for your lights should be through its own own properly fused circuit.

 

[fidds22]

Not adding the amperage to that circuit. Its going to be the trigger for my relay which will control my light bar. On my 2011, i had HID's, which only plugged into 1 light, so my passenger stock light plug was just taped off. I then got that H13 male end, and clipped it right into it so i didn't have to "tap" into the wires. Worked great, then when i sold my truck, my HID's and light bar came out real easy.