KHC rock sliders
- Thread starter Peterb
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Loufish
FRF Addict
Why don't you post the website so others (me) can see them...
mattio
Active Member
KHC looks like they make quality stuff! Someone buy this!
https://krazyhousecustoms.com/khc-off-road-gen2-ford-raptor-full-coverage-skid-plate-kit/
https://krazyhousecustoms.com/khc-off-road-gen2-ford-raptor-full-coverage-skid-plate-kit/
SilverBolt
Hired Gun
Better than stock but still not a rock slider.
wheelman55
Full Access Member
Here’s the link to the sliders.
https://krazyhousecustoms.com/ford-raptor-cab-length-running-boards-rock-sliders/
DreadPirateRaptor
Active Member
Frame bolted options, welded well, good steel thickness.
What are your requirements for a rock slider for a 7k rig?
thanks for posting the link I don’t know how to
I think the frame bolt on option looks pretty good
A flange or two hang down but basically high and tight as they say
should be quite strong and adjustable if you bash them
replaceable bottom plate
I think the frame bolt on option looks pretty good
A flange or two hang down but basically high and tight as they say
should be quite strong and adjustable if you bash them
replaceable bottom plate
I just called them
definitely heavy duty in the frame bolt option
jacking the truck on the running board no problem
about 130 lbs a side (the price of strength)
will take severe abuse $1900 list
the hardware allows adjustability
definitely heavy duty in the frame bolt option
jacking the truck on the running board no problem
about 130 lbs a side (the price of strength)
will take severe abuse $1900 list
the hardware allows adjustability
HEY EVERYONE, CHIMING IN A LITTLE LATE ON THIS BUT ALL BIAS OPINIONS ASIDE BEING IM A KHC EMPLOYEE THESE SLIDERS AND WAY OVER BUILT AND HAVE HELD UP TO EVERYTHING WE HAVE THROWN AT THEM. THE ARE A TRUE SLIDER, FULLY BOLT ON WITH DRILLING REQUIRED, NO WELDING. HERES A FUN PHOTO . LET ME KNOW IF ANYONE HAS ANY QUESTIONS
SilverBolt
Hired Gun
The leading edge behind the front wheel is likely to snag obstacles rather than deflect. The main body of the running board is made from flat stock and not tubular. The aluminum bottom will likely get ripped off when drug over an obstacle. They say it will support the weight of the truck but I am skeptical with only two frame mounting points. I don't see a location where a Hi-Lift could be used to jack up the truck. My $.02
DreadPirateRaptor
Active Member
I too, like my stuff overbuilt and with purpose!
That said, good catch on the leading edge... that I totally agree with. On the rest, I’d have to say just see what they can show. I’ve seen drawings that I was skeptical about as well, and then in execution were damn solid.
