JLT Oil Separator Quest -- No Oil Residue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

pbtjrlmrt

Full Access Member
Joined
Feb 21, 2019
Posts
560
Reaction score
459
Location
Oregon
I have the UPR kit on my '17 and get 2 fl. oz. roughly every 5k miles. Love the UPR kit. Goodyear hoses and factory connectors. I did have to trim under the foam engine cover, but who cares. If I remove the hoses and put the trimmed foam cover back on, it looks exactly like stock. The trimming is just underneath to clear the hoses and not visible from the outside. It still sits the same.

On my 19 it didn't require any mod to the engine cover.
 
OP
OP
armoredveh

armoredveh

Active Member
Joined
Feb 12, 2013
Posts
92
Reaction score
26
Location
NoVA/WDC
I should add (as the OP) that when I installed a JLT separator on my Gen 1, I had mist in the catch can at about the same 200 miles and at 1000 miles, about 2 oz. Interestingly, the amount of oil I collected from the catch can seem to decrease over time, to the point I only checked/emptied it prior to 5,000 mile service.
 
Top