JLT Oil Catch Can for Dummies

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

russm

Full Access Member
Joined
Aug 12, 2012
Posts
62
Reaction score
89
Just got my JLT oil catch can in and it is sah-wheeet!!!!
1.jpg

Since this is such a difficult and time consuming part to put on the vehicle, I thought I would do a write up......

1) Check garage fridge for beer (if none you will need to purchase 10 at your local store since JLT did not include any in the kit)
2) Take beer from fridge and open beer
3) Place beer on work bench and open hood of truck
4) Finish beer and open another beer

5) Remove hose
3.jpg
4.jpg

6) Finish beer and open another beer


7) Place old hose on cowl
5.jpg

8) Finish beer and open another beer


9) Route new hose and catch can
9.jpg

10) Finish beer and open another beer


11) Connect new hose and catch can
11.jpg

12) Finish beer and open another beer
13) Remove old hose from cowl
14) Finish beer and open another beer
15) Start truck to ensure no warning lights
16) Finish beer and open another beer
17) Turn off truck
18) Finish beer and open another beer
19) Close hood
20) Finish beer and open another beer
21) Finish off that last beer with a feeling of pride that you were able to accomplish such a technical installation. Additionally, now that you have that beer mentality going on and are in such a celebratory mood, it is a perfect time to chase momma around the house nekkid......

Russ Out

1.jpg

3.jpg

4.jpg

5.jpg

9.jpg

11.jpg
 
Last edited:

NickPic83

FRF Addict
Joined
Jan 31, 2012
Posts
9,639
Reaction score
2,442
Location
Rockland County NY
thanks for the write up.

just to be clear. the last pics says "will do harm to the pack" is that a typo or do u feel that this can bounce around a bit and harm the pack??
 
OP
OP
russm

russm

Full Access Member
Joined
Aug 12, 2012
Posts
62
Reaction score
89
thanks for the write up.

just to be clear. the last pics says "will do harm to the pack" is that a typo or do u feel that this can bounce around a bit and harm the pack??

Holy crap how did I miss that?????

It should read it will not do any harm to the coil pack

Never drink too much then chase momma around for a while and then try and do a smart ass write up.......

OK I fixed it......

Russ Out
 
Last edited:

Stepside

Full Access Member
Joined
Sep 17, 2011
Posts
600
Reaction score
177
Here are some more pictures of the JLT Oil Separator ~ :wink: ------>Thank You To ~ JLT ~ :waytogo:
 

Attachments

  • Oil Separator on Raptor 001.jpg
    Oil Separator on Raptor 001.jpg
    78.2 KB · Views: 205
  • Oil Separator on Raptor 004.jpg
    Oil Separator on Raptor 004.jpg
    111.6 KB · Views: 203
  • Oil Separator on Raptor 007.jpg
    Oil Separator on Raptor 007.jpg
    87.9 KB · Views: 201

Scott13

Full Access Member
Joined
Dec 27, 2012
Posts
218
Reaction score
40
Location
Goodyear, AZ
It takes the oil vapors from the crank case.. Runs it thru a filter which removes MOST to all of the oil and returns the vapor minus oil, which is now held in the can, back into the intake. Basically reduces the excess oil build up in the intake system keeping everything cleaner and presumably running better. I've installed them on all of my vehicles for years and started installing them on the vehicles we work on at the base... Major improvement on our duramax diesel fleet with reduced clogged EGRs, oil in inter cooler and plugged DPF's issues.
 
Last edited:
Top