Is there any way to straighten this fender?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

GordoJay

FRF Addict
Joined
Feb 8, 2020
Posts
7,439
Reaction score
15,900
Location
Colorado
Got a little oops action the other day. Bounced off a rock and jammed the step into the bottom of the front fender. Some minor breakage down low and a bulge out up above which leaves a pretty big gap with the door. Is there any likely fix for this or will I have to live with it? TIA

1690650012698.png

1690649964118.png
 

The Car Stereo Company

aka grumpy car stereo guy and frf rolodex
Supporting Member
Joined
Jul 8, 2012
Posts
32,612
Reaction score
23,657
Location
here, on frf
loos like you will need to pull the fender and straighten the mounts. it appears thr bottom mount got pushed up which will cause the fender to bulge like that. who was it? i know its not you.
 

GCATX

King Dingaling
Joined
Oct 6, 2018
Posts
9,027
Reaction score
25,602
Location
Central Texas
That's what you get for having the fat side of the step toward the front like that. :)

I would pull the step and see if it pops back.
 
OP
OP
GordoJay

GordoJay

FRF Addict
Joined
Feb 8, 2020
Posts
7,439
Reaction score
15,900
Location
Colorado
loos like you will need to pull the fender and straighten the mounts. it appears thr bottom mount got pushed up which will cause the fender to bulge like that. who was it? i know its not you.
I was wondering that. I don't know how the fender is mounted and don't want to pull it if I don't have to. I didn't see anything out of line when I crawled underneath, but I was wondering if one of the mounts got popped out and needs to be redone.

It was me. Slipped off a big rock and dropped onto the step.
 
OP
OP
GordoJay

GordoJay

FRF Addict
Joined
Feb 8, 2020
Posts
7,439
Reaction score
15,900
Location
Colorado
That's what you get for having the fat side of the step toward the front like that. :)

I would pull the step and see if it pops back.
Har. I took a sledge and beat the step back down so that it's close to it's original position. I was hoping that would fix it. No joy.
 

The Car Stereo Company

aka grumpy car stereo guy and frf rolodex
Supporting Member
Joined
Jul 8, 2012
Posts
32,612
Reaction score
23,657
Location
here, on frf
I was wondering that. I don't know how the fender is mounted and don't want to pull it if I don't have to. I didn't see anything out of line when I crawled underneath, but I was wondering if one of the mounts got popped out and needs to be redone.

It was me. Slipped off a big rock and dropped onto the step.
whose gen 2 did you borrow?
 

Nex

RIP CoronaRaptor
Joined
Sep 2, 2021
Posts
8,383
Reaction score
24,057
Location
Washington State
I was wondering that. I don't know how the fender is mounted and don't want to pull it if I don't have to. I didn't see anything out of line when I crawled underneath, but I was wondering if one of the mounts got popped out and needs to be redone.

It was me. Slipped off a big rock and dropped onto the step.

You can remove the fender liner and take a peak. Might be able to see something out of alignment and adjust as needed.


Or break out the hammer and dolly.

:hidesbehindsofa:
 

isis

FRF Supporting Member
Supporting Member
Joined
Aug 28, 2019
Posts
1,836
Reaction score
1,780
Location
PA
Can you see anything through the inside of the door at all? Like a bracket or something you could get a long punch on from inside/above? If it was pushed up from the step it’s gotta be close by.
 
OP
OP
GordoJay

GordoJay

FRF Addict
Joined
Feb 8, 2020
Posts
7,439
Reaction score
15,900
Location
Colorado
Can you see anything through the inside of the door at all? Like a bracket or something you could get a long punch on from inside/above? If it was pushed up from the step it’s gotta be close by.
No, I can't. I think I'll drop the fender liner when I get a chance.
 
Top