Gary E
Full Access Member
KustomFX is the latest seller of them. Long thread in 2023 on F-150 forum about them. I installed them in 2019. They work great. They are modified actual Ford parts.
Interior modifications, anything else you guys have added?
- Thread starter Cody Templeton
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Gary E
Full Access Member
I installed matching fabric to the visors over those hiddeous yellow stickers.
Killmat sound deadener
Kill switch
Cigar lighter ('13 no tengo, retrofitted the dash 12V power point)
Evil Lowrance mount sitting in a box waiting
2+ lbs of beach sand I haven't vacuumed yet
Kill switch
Cigar lighter ('13 no tengo, retrofitted the dash 12V power point)
Evil Lowrance mount sitting in a box waiting
2+ lbs of beach sand I haven't vacuumed yet
mashtastic
Full Access Member
If you relocate the switches, then it will work....
Gary E
Full Access Member
What switches?
Gary E
Full Access Member
Most likely, which would make it not an easy install. As a result, there likely wouldn't be very many Raptor pilots interested in it.
mashtastic
Full Access Member
Probably not, I did the F250 overhead conversion when it came out
neovenator
Member
So far I’ve done
- Ceramic tint all around
- Sync 3.4 (using Sync 4) conversion, Foursynctech kit also added Navigation + USB-C conversion inside the center console storage
- Matte Red 3M (sample size) to fix the worn red leather stripe
Currently trying to figure out how I’m going to dechrome the interior. I want to go for something similar on the Gen2’s that have the carbon interior trim. Not sure if I want to wrap it, or see if I can find some real carbon fiber interior pieces. I saw some ABS plastic “carbon fiber” trims, but from my own experience, real carbon fiber has a nice premium look to it with depth.
I’m also looking into “windshield lights”. Something like this but amber. Found some for $49.99 on Amazon.
- Ceramic tint all around
- Sync 3.4 (using Sync 4) conversion, Foursynctech kit also added Navigation + USB-C conversion inside the center console storage
- Matte Red 3M (sample size) to fix the worn red leather stripe
Currently trying to figure out how I’m going to dechrome the interior. I want to go for something similar on the Gen2’s that have the carbon interior trim. Not sure if I want to wrap it, or see if I can find some real carbon fiber interior pieces. I saw some ABS plastic “carbon fiber” trims, but from my own experience, real carbon fiber has a nice premium look to it with depth.
I’m also looking into “windshield lights”. Something like this but amber. Found some for $49.99 on Amazon.
Attachments
Similar threads
