Installed Foutz Motorsports Rear Coil Spacers!

[Rengastarr]

@Rengastarr did you or were you planning on getting your suspension position sensors (is that the right term??) recalibrated front and back? If so could you please share how you did this? On the gen2 we had a procedure with forscan but I don’t see anything available for gen3. I plan on offroading my gen3 to its limit like I did with my current truck and haven’t considered spacers at this point yet due to my inability to find a way to recalibrate the sensors.

Hi there! I've heard about what you're talking about, but I have no idea how to do it, or how it works. These computer controlled shocks are over my head Lol.

How does it help to adjust the shocks for the ride height? Am I throwing off the shocks now that I put the spacer in the rear?

And do the collars in the front throw it off as well?

 

[catinthehat85]

Hi there! I've heard about what you're talking about, but I have no idea how to do it, or how it works. These computer controlled shocks are over my head Lol.

How does it help to adjust the shocks for the ride height? Am I throwing off the shocks now that I put the spacer in the rear?

And do the collars in the front throw it off as well?

Hey yeah I am by no means the expert, but the shock sensors are on all four corners for the first time on a gen3, and they give input to the live valve system so your shocks know how to “behave” on whatever you’re driving over.

I heard maybe the dealership can do it, but not sure. I know dealerships could do it for the gen2’s. It’s just so hard to find good info on gen3’s despite this being the second model year already…

Ask your dealership you want to recalibrate zero position for the Vehicle Dynamics Module (VDM) because you lifted the front and back, and see what they say. If you can report back that would be much appreciated!

 

[Rengastarr]

Hey yeah I am by no means the expert, but the shock sensors are on all four corners for the first time on a gen3, and they give input to the live valve system so your shocks know how to “behave” on whatever you’re driving over.

I heard maybe the dealership can do it, but not sure. I know dealerships could do it for the gen2’s. It’s just so hard to find good info on gen3’s despite this being the second model year already…

Ask your dealership you want to recalibrate zero position for the Vehicle Dynamics Module (VDM) because you lifted the front and back, and see what they say. If you can report back that would be much appreciated!

Ok, I’ll reach out and see what they say. Stay tuned, thanks for the help!

 

[Mwadsworth]

That truck looks terrible and you should sell it to me at MSRP LOL. Great stance and thanks for the info as I tow as well and still trying to find an available 35 or 37.

 

[QCRappy]

Ok, I’ll reach out and see what they say. Stay tuned, thanks for the help!

the tool is the VDM - they can see the height for each shock. they need to be reset back to I believe 0

 

[Rengastarr]

That truck looks terrible and you should sell it to me at MSRP LOL. Great stance and thanks for the info as I tow as well and still trying to find an available 35 or 37.

Ok fine! Lol And ya happy to help. Good luck man! Gotta check out Cody at TheRaptorConnection instagram, he gets leads on decent prices sometimes, and they sell in minutes!

 

[Donovan]

This looks so good, but I like to still go through parking garages lol.

However - I'll do this if I get the KC-lites installed!

 

[Rengastarr]

This looks so good, but I like to still go through parking garages lol.

However - I'll do this if I get the KC-lites installed!

Shit! I haven’t tried that yet. Lol

 

[Donovan]

Don't you probably wont make it now. I can do 6'8" comfortably but I'd be worried for you my friend ha

 

[Donovan]

More pics though..

I'm in love..