info on water crossing depth??

[r3run33]

Hello been looking at what info is out for the 2017 but could not find a figure on actual water forging/crossing depth? anyone have that info? in my area often have to cross mild streams etc but some can be 1 ft at times or more I would hope that it would be as good as the old Gen 1 which was 30 inch

 

[r3run33]

here is a link to my old Gen1 stuff I had
http://www.fordservicecontent.com/Ford_Content/catalog/owner_guides/13f12rq1e.pdf

 

[Deleted member 12951]

From what I understand, Gen2 sits 1" higher than Gen1 so I would say it will be 30" or better.

 

[r3run33]

yes I seen that and I would hope that would be the case but was a bit worried about the fancy new ECO boost stuff not sure how all is placed in there. Hey by the way does anyone know where the diff breather tubes are placed?

 

[matt33]

I crossed some 24"+ deep creeks in my Gen 1, no issues at all. I know that doesn't really help, but I thought I'd share.

 

[beemerman]

@Rookie

 

[Rookie]

She's good up to the hood. Trust me.

freedommotorsports.us

Email: [email protected]

​

 

[Tim118]

Gen 1 was good to at least 30"

https://vimeo.com/28874428

 

[Jimbo]

@Rookie, post your vid... LOL

 

[Rookie]

https://youtu.be/Gp8814LTlyM