Husky Wheel Well Liner Install

[SMIKE]

Got my wheel well liners installed today.

Pretty easy, about 10 min per side and you only need a ratchet with 7mm and 10mm sockets.

They can be ordered here for $129.99. Placed the order Wed and they showed up on Sunday.

Husky Rear Liners [21+ Raptor]

Husky Liners® Wheel Well Guards cover, protect and boost the appearance of your truck's wheel wells. Who’d have ever thought a wheel well liner could look so sexy? Fitment: 2021+ Ford F-150 Raptor SKU: 79171 CLICK HERE FOR INSTRUCTIONS

www.levelupsuspension.com

Before:


Remove the seven screws holding the fender on (7mm socket)

 

[SMIKE]

Next place the provided clips into the two outermost holes inside the fender well.

 

[SMIKE]

Next insert the fender liner into the wheel well. The cutout goes behind the shock. It will take a bit of massaging but goes in pretty easy.

After that you will want to slide the front/outer edge between the body and the stock plastic fender that you unbolted. Work your way around until it is completely inserted.



Then take the 10mm bolts provided and adjust the fender liner until the holes line up with the clips that you put on the body seams.

 

[SMIKE]

Finally replace all seven of the 7mm fender screws and you're done!



Here's a few pics of them installed.

 

[AutoXRacer]

Do the fender flairs come off when the fasteners are removed? Or does it stay in place?

 

[SMIKE]

Do the fender flairs come off when the fasteners are removed? Or does it stay in place?

It stays in place, just need to remove the fasteners to put the liner between the fender and the body for a cleaner look.

 

[jjws1968]

Should have just spent a few more bucks and had them professionally line-x’d. Much cleaner and long lasting if u can find a guy that cares to do it. I could not be happier.

 

[Antho]

Should have just spent a few more bucks and had them professionally line-x’d. Much cleaner and long lasting if u can find a guy that cares to do it. I could not be happier.

Every liner thread absolutley has to have a obligatory "Should have sprayed them" post. So, thanks for that.

 

[4DPWR]

Looks great. I have tried to order them but it appears they will not ship to Canada. GRRRRRR

 

[Swacer_2]

Should have just spent a few more bucks and had them professionally line-x’d. Much cleaner and long lasting if u can find a guy that cares to do it. I could not be happier.

In the installation post that you were replying to, I was a little curious how the husky liner didn't seem to cover the painted area at the bottom corners of the fender. I was looking at your photos, and it looks like your line-x person didn't coat that area either (the horizontal area at the very bottom of the fender. Is that true?