Help! just installed Cobb fmic on 2018 raptor & can't get the passenger side headlight cover to clip back in, driver side goes in no problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

lildub03125

Member
Joined
Feb 16, 2024
Posts
17
Reaction score
7
Location
Los Angeles
Help! just installed Cobb fmic on 2018 raptor & can't get the passenger side headlight cover to clip back in, driver side goes in no problem. the 6 clips on driver side are all straight. the passenger side from the factory all have 5 straight clips and one clip is at a weird angle. Ive seen videos where people remove 2 bolts on the fender flare and pop the fender flare out a little to remove it and im wondering if I do that if I can get it back in, but also heard those fender flare clips are one time use only. I've seen a few videos and the Cobb website instructions say you don't have to take the fender flare out a little, and seems like that's how the majority of people do the install. anyone have any issues with passenger side headlight trim panel going back in? is there a trick im missing to get it in. IMG_8267.jpegIMG_8270.jpegIMG_8287.jpegupload_2020-3-25_12-24-24.png
 

Sharpie69

Full Access Member
Joined
Oct 22, 2021
Posts
899
Reaction score
738
Location
Boston, Ma
Yes, remove the two screws and pop the retention clips to loosen the front of the fender flare, use a trim tool carefully and you shouldn't have a problem with the clips. I have done this process several times with no problems.
 

Old-Raptor-guy

FRF Addict
Joined
Jul 25, 2021
Posts
1,858
Reaction score
4,242
Location
USA
Again, just saying put link here to the thread with the answer to your problem. This place is actually a more logical location anyway.
 
Top