Hardwiring a radar detector

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

NJSP117

Full Access Member
Joined
Jun 27, 2012
Posts
344
Reaction score
142
Location
New Jersey
I got my blend mount today...installing it tomorrow with a V1. Looks pretty straightforward....much cleaner than running the wire to the lighter...
 

AndyR

Full Access Member
Joined
Mar 5, 2010
Posts
455
Reaction score
35
I got my blend mount today...installing it tomorrow with a V1. Looks pretty straightforward....much cleaner than running the wire to the lighter...

The hardest part is releasing the tabs on the shroud and white connector plug.
 

TXCobra

Full Access Member
Joined
Jan 15, 2011
Posts
309
Reaction score
194
anymore details on how to release the shroud? Feels like I am going to break something...

EDIT: So I found it easier to remove the top piece. It pulls right down and I could actually access the plug without even removing the bottom piece. it would be all done except I have recycled this mirror tap 3 times from 3 different vehicles, this would make 4 and I finally broke the leads off trying to get them in the plug. So I had to order a new mirror tap. but this thread helped me figure out taking off the top. It comes off much easier than the bottom:

http://www.f150forum.com/f118/radar-detector-power-mirror-286079/index6/

Scroll down to post #57
 
Last edited:

pjones

Full Access Member
Joined
Jan 7, 2017
Posts
662
Reaction score
418
Don't take this the wrong way, because I have about 3 or 4 V1 in various cars, but I have found that using Waze is much easier for cop detection. I know you have to run an app, etc, but seems to do well enough for me. And with a lot of the LE using laser, I haven't found that a V1 was much help.
 

consolidated

Active Member
Joined
Sep 7, 2016
Posts
56
Reaction score
34
Very helpful thread, thanks for the pics. Can anyone tell me how to remove the plastic kick panel NEXT to fuse box cover to get better access to it. I'm about to break it instead of removing it.
 

kdub405

Full Access Member
Joined
Jun 18, 2014
Posts
684
Reaction score
371
Don't take this the wrong way, because I have about 3 or 4 V1 in various cars, but I have found that using Waze is much easier for cop detection. I know you have to run an app, etc, but seems to do well enough for me. And with a lot of the LE using laser, I haven't found that a V1 was much help.



I'm not sure waze is a good replacement for a decent radar detector. That's just my 2¢ tho.


Sent from my iPhone using Tapatalk
 

SilentShooter

FRF Addict
Joined
Dec 29, 2013
Posts
3,052
Reaction score
1,964
Location
Siesta Key, FL
What you really would want is a quality radar unit and the AntiLaser Priority laser jamming system tied in.

I run the latest ****** unit and it has alerted me a number of times to cops running radar when waze had nothing. My trip to Snoball this year I ran my ****** with the ****** app on my phone an Waze on a tablet. I wish I could tie into waze with the ****** that would be the best of both worlds as way more people run Waze than the ****** app.

Now that I got rid of my last mustang when I buy my next sports car I am going with AntiLaser Priority front and rear setup with a radar tied in.
 

consolidated

Active Member
Joined
Sep 7, 2016
Posts
56
Reaction score
34
Thank you to Backwoods and others. I mounted mine behind the windshield frit, what I could find online shows no loss of signal detection. Stealthy location will save me from having to hide the V1 when a LEO is around, you cannot see it from the front. Aux6 switch is nice, easier than using the volume knob when I don't need a RD in town.
 

Attachments

  • IMG_8637.JPG
    IMG_8637.JPG
    65.1 KB · Views: 147
Top