GooseTuned Gen 3 - Baseline Dyno Runs vs Gen 2 Baseline!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
GooseTuned

GooseTuned

Supporting Vendor
Supporting Vendor
Joined
Aug 24, 2018
Posts
1,639
Reaction score
1,964
Location
New Mexico
What’s his setup?

*Cobb Accessport
e85 and GooseTuned Custom TCM
*Ford Racing M-12405-35T 1 step colder plugs
*Injector Dynamics 1050cc injectors
*CRP Stage 4 turbos
*SPD alpha catted downpipes
*Mountune FMIC w/cold side piping
*CVF hot side piping
*K&N inlet tubes
*Injen CAI*Tial Q 50mm BOV
 
OP
OP
GooseTuned

GooseTuned

Supporting Vendor
Supporting Vendor
Joined
Aug 24, 2018
Posts
1,639
Reaction score
1,964
Location
New Mexico
I was able to remote tune a 2022 Raptor today on the dyno!

This highlights the new CRP Stage 5 Turbos!

Truck: 2022 Raptor 37PP
Fuel: 93oct (Stock fuel system!)
Mods: COBB Intake, COBB Intercooler, K&N Inlet tubes, CRP Stage 5 Turbos, STOCK DOWNPIPES

This truck would've made another 25hp had the owner opted for SPD Alpha Catted downpipes, but he wanted to stay stock. So not many mods at all.

This is on a local Mustang dyno, which reads 10-15% lower than a dynojet:

Mustang Settings: 508whp 502wtq (stock truck makes 340/420)
Dynojet Settings: 558whp 552wtq (stock truck makes 370/480)

Very very impressed with these new units! This truck has MINIMAL mods!

If I had to choose between Stage 4 and Stage 5 turbos, the new Stage 5 is the clear winner. 0 loss in spool, and 30-50whp gains over the Stage 4 turbos!

Check them out here: https://www.goosetuned.com/product-...-5-46-50mm-cr-8-blade-turbine-upgrade-turbo-s



Truck on dyno.jpg
Dyno chart.jpg
TV Tach Photo.jpg
 
Top