GooseTuned Gen 3 - Baseline Dyno Runs vs Gen 2 Baseline!

[MrTorque]

Thanks again Goosetuned for the stage 2 tune the truck rips! More power everywhere, it seems to accelerate easier at light and moderate throttle too which seems to be making my mpgs better maybe? I was averaging 13.7 according to the dash but after yesterdays same type of driving(well a little more spirited driving with the extra power) it was saying 15.9. Either way the truck feels really proper, lights the tires up rolling into it after a stop but pulls hard through the rpms when it hooks.

 

[GooseTuned]

Thanks again Goosetuned for the stage 2 tune the truck rips! More power everywhere, it seems to accelerate easier at light and moderate throttle too which seems to be making my mpgs better maybe? I was averaging 13.7 according to the dash but after yesterdays same type of driving(well a little more spirited driving with the extra power) it was saying 15.9. Either way the truck feels really proper, lights the tires up rolling into it after a stop but pulls hard through the rpms when it hooks.

Very cool, thanks a ton!!! Happy you're liking it!

 

[Nex]

Great to see Gen 3s getting tuned finally.

 

[GooseTuned]

It's been a long time coming!

 

[pandonsf]

Amazing how quick @GooseTuned sends your map once you email your serial number! Looking forward to logging and finishing the tune

 

[GooseTuned]

Amazing how quick @GooseTuned sends your map once you email your serial number! Looking forward to logging and finishing the tune

Thank you!! Same here! This is going to be a blast!

 

[catinthehat85]

Question for those knowledgeable here…how much do you need to drive after switching to E50 before you get hard on the throttle? I’m assuming it takes a little time to mix and make it to the fuel line.

 

[10SpdsOfFury]

Mile or two.

 

[GooseTuned]

Yep! I say 5mi to be very very safe. 2mi is totally sufficient

 

[catinthehat85]

Thank you to both of you! Just did my first e85 measurement, it was exactly e85 lucky me haha.