GEN3 Forscan

[Jmeo]

You can just turn it off in your dash. I have a 2023,
Under - Features
Then - Driver Assistance
Then scroll down to the bottom, and turn it off

Correct, I have been using it this way for the past 5 months but every time I put the truck in reverse I get an alert pop up inside the gauge cluster saying that it has been turned off. I am wanting to get rid of the alert that pops up and I thought doing this in ForScan did just that.... Am I wrong?

 

[Antho]

@Jmeo have you driven it after making the change? I know sometimes if you make changes in the IPMA you will get that until you drive it and the truck relearns steering center.

 

[JayRods]

Got it

I just turned mine off, wait n see what happens. Mine has been on

 

[Jmeo]

@Jmeo have you driven it after making the change? I know sometimes if you make changes in the IPMA you will get that until you drive it and the truck relearns steering center.

I did not try driving it. Every time I see the alert my scared ass reverts it back to stock, ha-ha. Could it be that simple?

 

[Jmeo]

With the reverse braking assist turned off inside the truck settings as such:



I get this EVERY TIME I put the truck in reverse:



Hence the trying to turn it off in ForScan


Edit: Now that I think about it, I can not be sure it always did it (bad memory), but it has been for the past month or so. Only thing I can think of is that the OTA update changed something and now it's doing it?

 

[ToadSmasher2K1]

With the reverse braking assist turned off inside the truck settings as such:

View attachment 440927

I get this EVERY TIME I put the truck in reverse:

View attachment 440928

Hence the trying to turn it off in ForScan

Shouldn’t you be looking behind you or at the backup cam if you’re backing up?

 

[Antho]

I did not try driving it. Every time I see the alert my scared ass reverts it back to stock, ha-ha. Could it be that simple?

@Jmeo could be. Make the change, once the change is made clear any DTCs and go do a little test drive.

 

[Jmeo]

Shouldn’t you be looking behind you or at the backup cam if you’re backing up?

I hear you......but

Having been driving fire apparatus for over 20 years I only use side mirrors. As I turn to look mirror to mirror I cannot help but see the irritating alert on the screen and my OCD wants it gone. I am POSITIVE it was not always there.

 

[Jmeo]

@Jmeo could be. Make the change, once the change is made clear any DTCs and go do a little test drive.

This seems wrong to me with my past experiences with ForScan. I do not think this is the answer.

**Says the man who has been married twice, and therefore wrong at least twice**

 

[Antho]

This seems wrong to me with my past experiences with ForScan. I do not think this is the answer.

**Says the man who has been married twice, and therefore wrong at least twice**

@Jmeo i just looked at it. Looks like a config incompatible DTC. I’ll look into it.