GEN3 Forscan

[Littlefx4]

Need some help with "fog lights on with DRL". I changed my As Built to the numbers below but i cannot get the fog lights to shut off with my DRLs. The Fog Light icon in the dash will turn on and off when i hit the button but the fog lights themselves will not shut off when DRLs are activated. I have Parking lights turned on with DRL and all that works fine.... any help is appreciated!!

DRLs - allow fog lights

BCM

726-38-02

01xx

xxxx

xx--

allows fogs to be turned on with DRLs

I made the same changes in forscan and my fog lights do not turn on with DRL's. Hope someone has some input on this.

You may want to double check that you gents are changing the correct code & reattack. I’m not seeing 726-38-02 in the pic below. From the pic, it appears you‘re trying to make the first change as that code is 726-39-01….

 

[vgzprt]

You may want to double check that you gents are changing the correct code & reattack. I’m not seeing 726-38-02 in the pic below. From the pic, it appears you‘re trying to make the first change as that code is 726-39-01….

Thank you very much for posting this. I will try it when I get out from work. When I changed the 726-38-02 01xx-xxxx-xx-- it shut off my 3 marker lights so I restored it back to as built 00xx-xxxx-xx-- and all is good again.
The spreadsheet has different #

DRLs - allow fog lights

BCM

726-38-02

01xx

xxxx

xx--

allows fogs to be turned on with DRLs

 

[kpecks]

Thank you very much for posting this. I will try it when I get out from work. When I changed the 726-38-02 01xx-xxxx-xx-- it shut off my 3 marker lights so I restored it back to as built 00xx-xxxx-xx-- and all is good again.
The spreadsheet has different #

DRLs - allow fog lights

BCM

726-38-02

01xx

xxxx

xx--

allows fogs to be turned on with DRLs

It looks like the google sheet spreadsheet from the f150 forum is not accurate and the proper line code is 726-39-01....

 

[Tusk]

I'm going to change my DRLs to 75% from 100%. I'm getting some flickering.

It looks like I changed 726-42-01 to 0202-xxxx-xxxx. Does it need to stay like that and then change 726-38-01 to xxxx-4Bxx-xxxx?

Also, on the Glare Free, do you make all of the changes at once or make the first then reset?

 

[Littlefx4]

I'm going to change my DRLs to 75% from 100%. I'm getting some flickering.

It looks like I changed 726-42-01 to 0202-xxxx-xxxx. Does it need to stay like that and then change 726-38-01 to xxxx-4Bxx-xxxx?

Also, on the Glare Free, do you make all of the changes at once or make the first then reset?

Regarding your DRLs, I would reset them to the factory setting and then change the appropriate code for 75% duty cycle…726-38-01 to xxxx-4Bxx-xxxx.

As for the Glare Free, it doesn’t matter the order in which you change the codes…just be sure to reset the APIM after changing those codes. I caution you to double check & triple check that you’re changing the correct code.

 

[Tusk]

Regarding your DRLs, I would reset them to the factory setting and then change the appropriate code for 75% duty cycle…726-38-01 to xxxx-4Bxx-xxxx.

As for the Glare Free, it doesn’t matter the order in which you change the codes…just be sure to reset the APIM after changing those codes. I caution you to double check & triple check that you’re changing the correct code.

Does anybody know the default setting for 726-42-01?

 

[Littlefx4]

Does anybody know the default setting for 726-42-01?

Wait, wut! You didn’t back up your modules prior to changing it? Bad move. Always save your modules first that way YOU know what the original settings are should the need arise to revert back to factory settings.

default: 726-42-01 0303 0404 0583

 

[Tusk]

Wait, wut! You didn’t back up your modules prior to changing it? Bad move. Always save your modules first that way YOU know what the original settings are should the need arise to revert back to factory settings.

default: 726-42-01 0303 0404 0583

Thanks!

I backed them up. I changed several things so I was just going to change the brightness back to stock then adjust to 75%. I guess I should just load the original file.

 

[WTX]

Remember you can always look them up if you didn’t back up or forgot

https://www.motorcraftservice.com/AsBuilt

 

[Chuckaroo91]

@mkraus01

Only have to make the below changes. The 726-15-01 is the same as the 1st 2 digits of the tires circumference are the same. Just the last 2 digits. 35" (0A5D) and 37" 0AC1)

37" = 726-15-02 C1xx-xx
35" = 726-15-02 5Dxx-xx

I may need an explain like I'm 5 here. Attached is what I am seeing on my 35" Raptor. How would the first line be adjusted? 726-15-01?