GEN 3 Official Aftermarket Wheels Thread

[GU3R086]

FP3-SL satin black with gloss black rings.
17x9 +12
37x12.50 Toyo RT
Eibach 1” front springs

https://imgur.com/a/7adhizs

https://imgur.com/a/wdUCHVT

https://imgur.com/a/oABMBRL

https://imgur.com/a/lXjog6S

https://imgur.com/a/oektoFm

This looks freaking KILLER

 

[20leadfoot]

ok .. that will save some time. it took about 20 minutes to remove all of them from 4 wheels. hopefully the cross-threaded bolts can be re-installed. they were a PITA to back-out

Cross threaded a couple of mine taking them off. Just run a bottoming tap on the wheel threads and run a die over the bolt threads you will be good to go...

 

[maxr]

Rubbed Permatex Anti-Seize 81343 on every bolt. Was able to use my Makita Power Drive on setting 2 to install all of the bolts. The lub clearly helped. Did all 4 wheels in 1 hour. I'll find out how well it works in April when I swap my studded tires for my BFG KO2

 

[darkryder]

Looking for a set of Method MR703 in matte black 17x8.5 0mm offset for my 24 Raptor 35. If you have a set in stock, shoot me a message with price and ETA shipped to 95051. Thanks

 

[Subaruski]

Looking for a set of Method MR703 in matte black 17x8.5 0mm offset for my 24 Raptor 35. If you have a set in stock, shoot me a message with price and ETA shipped to 95051. Thanks

They are pretty inexpensive just direct through TireRack.