GEN 3 Official Aftermarket Wheels Thread

[EndlessEight]

Alright. I've now been through this entire thread 2 times.

@Pacific Wheel I've looked at every single wheel vendor on your website and maybe you can help recommendations based on anything I missed vs. my criteria below. Would love more examples of double tandem spoke looks.

Here's my criteria in order of importance:
- significant weight savings over base 35" stockers
- Willwood big brake kit can fit under them
- good looks
- OEM size 17x8.5 (or 17x9)
- offset close to stock (I like the look of a slight poke)


Here are the wheels I've found I like but don't exactly hit all criteria:

1. KMC Wrath - 17x8.5 | 0mm offset | 25.74 lbs
Love, love, love the looks of the wheel. Love the weight. Dislike the 1.5" poke. No idea if BBK would fit.


2. Enkei RPT1 - 17x9 | 12 mm offset | 25 LB
Love the look. Not sure how much this will poke out over stock. Good weight savings. No idea if BBK would fit.



3. KMC Trail 17x8.5 | 0mm offset | 26.65 lbs
Good looks. Good weight. offset issues. No idea if BBK would fit.


3. Black Rhino Dugger - 17x8.5 | 10mm offset | 25.24 lb
Good weight. Offset closer to stock. Not in love with looks. No idea if BBK would fit.


4. Icon Vector 6 - 17x8.5 | 6mm offset | 30 lbs
Good looks. still a lot of offset. Not much weight savings. No idea if BBK would fit.


5. Icon Compression - 17x8.5 | 6mm offset | 30lb
same as above


6. Method 706 - 17x8.5 | 25mm offset | 30.4 lb
Not in love with the look, though it's growing on me. Offset good. Weight saving is negligible. No idea if BBK would fit.

 

[mts]

Alright. I've now been through this entire thread 2 times.

@Pacific Wheel I've looked at every single wheel vendor on your website and maybe you can help recommendations based on anything I missed vs. my criteria below. Would love more examples of double tandem spoke looks.

Here's my criteria in order of importance:
- significant weight savings over base 35" stockers
- good looks
- OEM size 17x8.5 (or 17x9)
- offset close to stock (I like the look of a slight poke)


Here are the wheels I've found I like but don't exactly hit all criteria:

1. KMC Wrath - 17x8.5 | 0mm offset | 25.74 lbs
Love, love, love the looks of the wheel. Love the weight. Dislike the 1.5" poke.
View attachment 408905

2. Enkei RPT1 - 17x9 | 12 mm offset | 25 LB
Love the look. Not sure how much this will poke out over stock. Good weight savings.
View attachment 408906


3. KMC Trail 17x8.5 | 0mm offset | 26.65 lbs
Good looks. Good weight. offset issues
View attachment 408907

3. Black Rhino Dugger - 17x8.5 | 10mm offset | 25.24 lb
Good weight. Offset closer to stock. Not in love with looks.
View attachment 408908

4. Icon Vector 6 - 17x8.5 | 6mm offset | 30 lbs
Good looks. still a lot of offset. Not much weight savings
View attachment 408909

5. Icon Compression - 17x8.5 | 6mm offset | 30lb
same as above
View attachment 408910

6. Method 706 - 17x8.5 | 25mm offset | 30.4 lb
Not in love with the look, though it's growing on me. Offset good. Weight saving is negligible.
View attachment 408911

You need these in black.

 

[EndlessEight]

You need these in black.

View attachment 408912

I love the Y spoke look. My suspicion is that they will be more than what I am looking to spend.

 

[EndlessEight]

Enkei RPT1 17x9 ET +12 mounted on factory 315s. Thank you Justin @Pacific Wheel for incredible service

View attachment 404326
View attachment 404327
View attachment 404328
View attachment 404329

How much do these poke? Can't really tell from the front shot.
Did you need new stems? Did the OEM TPMS work without issue?

I probably wind up with these tbh!

 

[Pacific Wheel]

@EndlessEight The RPT1 is a solid choice. Expensive for flow form but great quality. They are on special for $416 per wheel shipped in the gun metal. @LOUSCRW just installed some RPT1's. I wonder if he could snap a straight on pic so you could see the exact poke.

This wheel below is a +18. The +18 is 6mm or .25" less poke than a +12

 

[FP Forged]

I love the Y spoke look. My suspicion is that they will be more than what I am looking to spend.

$2200 shipped in black.

 

[dillard09]

I love the Y spoke look. My suspicion is that they will be more than what I am looking to spend.

They would look sexy on my Ruby in bronze!!

 

[EndlessEight]

$2200 shipped in black.

Did you mention somewhere they are forged? What are the specs?

@EndlessEight The RPT1 is a solid choice. Expensive for flow form but great quality. They are on special for $416 per wheel shipped in the gun metal. @LOUSCRW just installed some RPT1's. I wonder if he could snap a straight on pic so you could see the exact poke.

This wheel below is a +18. The +18 is 6mm or .25" less poke than a +12

View attachment 408918

Are you aware if big brakes (like the wilwood kit) fit behind these or any of the ones I referenced in my previousl post?

 

[Pacific Wheel]

Did you mention somewhere they are forged? What are the specs?


Are you aware if big brakes (like the wilwood kit) fit behind these or any of the ones I referenced in my previousl post?

FP's are monoblock forged. 17x9 +12

What's the part number on the Willwood kit? I can check with Enkei on the clearance. The Y spoke hasn't came in yet so I can't check fitment till they arrive.

 

[EndlessEight]

FP's are monoblock forged. 17x9 +12

What's the part number on the Willwood kit? I can check with Enkei on the clearance. The Y spoke hasn't came in yet so I can't check fitment till they arrive.

Wilwood Disc Brakes

2022 Ford F-150 RaptorPart No: 140-17000-DR, brakes, disc brakes, big brakes, bbk, brake conversion kit, bolt-on brake kits, front brakes, calipers, axle flange, housing, rotors, dynalite, dynapro, superlite, d52

www.wilwood.com

Also, just to confirm the 0 offset on the 17x8.5 pokes like 1.5” I think you‘ve mention in here, correct?