Gen 3 Live Valve Recalibration

[MaYouYe]

开车到平坦的地方，将变速杆换到空档，然后按下变速杆旁边的 M 手动换档按钮。你会看到仪表板上弹出一个提示，使用方向盘按下确定。然后关掉卡车，然后在不踩油门的情况下将其重新打开以打开车辆电源（但不打开发动机）。然后快速踩下油门 3 次。你会看到弹出一个提示

Got it. Will do it tonight. Thanks!

 

[MaYouYe]

Are you guys doing this reset for aftermarket spring installs or is there any improvements to be had on a stock truck?

I am doing this because I have eibach springs installed front and rear.

 

[ToadSmasher2K1]

My recalibrations didn’t last if I didn’t do engineering mode. Meaning I’d check it 3 or 4 days later and it would be out of spec again. Only when I did it with engineering mode did it actually stick.