Got it. Will do it tonight. Thanks!开车到平坦的地方,将变速杆换到空档,然后按下变速杆旁边的 M 手动换档按钮。你会看到仪表板上弹出一个提示,使用方向盘按下确定。然后关掉卡车,然后在不踩油门的情况下将其重新打开以打开车辆电源(但不打开发动机)。然后快速踩下油门 3 次。你会看到弹出一个提示
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Got it. Will do it tonight. Thanks!开车到平坦的地方,将变速杆换到空档,然后按下变速杆旁边的 M 手动换档按钮。你会看到仪表板上弹出一个提示,使用方向盘按下确定。然后关掉卡车,然后在不踩油门的情况下将其重新打开以打开车辆电源(但不打开发动机)。然后快速踩下油门 3 次。你会看到弹出一个提示
I am doing this because I have eibach springs installed front and rear.Are you guys doing this reset for aftermarket spring installs or is there any improvements to be had on a stock truck?