Gen 2 OEM Skid Plate Hardware

[fordraptorfun]

Anyone have the OEM part numbers for the 4 skid plate bolts and clip nuts towards the front of the skid plate? These are the ones that you need a 13mm socket to remove.

Not to be confused with the two bolts/nuts towards the rear of the skid plate that need a 15mm socket to remove.

HB4 and HN2 in the exploded view below.

 

[OEMPlus Raptor]

GEN 2 - Skid plate bolts

I think I figured this out. The part number I posted above is not correct. With the help of this site https://parts.ford.com/en.html I found a parts diagram for my Gen3 by using my VIN These (below) appear to be what I need for my Gen3.

www.fordraptorforum.com

 

[kalel]

GEN 2 - Skid plate bolts

I think I figured this out. The part number I posted above is not correct. With the help of this site https://parts.ford.com/en.html I found a parts diagram for my Gen3 by using my VIN These (below) appear to be what I need for my Gen3.

www.fordraptorforum.com

Gen 3 bolts the same as Gen 2?

 

[OEMPlus Raptor]

Gen 3 bolts the same as Gen 2?

I'm not 100 percent sure, but I like my chances on this one.

 

[kalel]

I'm not 100 percent sure, but I like my chances on this one.

Gotcha. Looks like it but please let us know. I already looked at mine and can tell I’ll have to chop chop and replace

 

[T1mbo-Slice]

Is there a nut on top of the long 15mm bolt that goes at the back of the skid plate? Mine was missing the bolt so I ordered one and it just spins there and I can’t see up top to tell.