Geiser Coils & Element Hard Parts UCAs on 2019 SCAB

[chopn8r]

I finally threw some parts at my 2019 Raptor SCAB!!

Geiser Offroad 2.5" progressive coils
Element Hard Parts Billet upper control arms
SDi Eclik active suspension on OEM Live valve shocks
BFGoodrich 37x12.50R17 KO2 tires
Raceline Ryno 17x8.5 wheels in +18 offset

Loving the ride so far and can't wait to get off pavement to see what these coils are going to do. I may need to have SDi revalve my shocks again. TBD.

 

[GunnyMac]

Truck looks great. How much did it raise the front of the truck?

 

[MurderedOutSVT]

Killer stance!

 

[chopn8r]

Truck looks great. How much did it raise the front of the truck?

Man, I was so stocked to get everything installed that I never actually measured before & after for an accurate lift amount. They are the smaller Geiser coils, though...the 2.5".

I just measured it now & from center of the hub to the fender is 26" & it's been almost 2 months since the install so they should be settled in by now.

Hope that helps.

 

[chopn8r]

I installed some Innov8 Racing Bed Supports yesterday. I'm waiting for my GPS mount from them and that will be next along with the PCI VHF Radio & intercom.

 

[LordxEkim]

What do the bed supports help? Sry I’m a truck noob

 

[chopn8r]

What do the bed supports help? Sry I’m a truck noob

Under hard off-roading the bedsides on the Raptor are know to flex & separate, or spread from the tailgate.

 

[chopn8r]

Hi, everyone! I bought another Raptor and have been busy working to keep up with 2 truck payments so I haven't done much with the truck until yesterday!

I've had my SPD Turbo Adapters for a while but was waiting until I received the resonator delete kit to install. The factory studs for the turbos are a bitch & my truck only has 26k miles on it. Do yourself a favor and get the extractor the SPD recommends! Once those were on it was trombone time!

The SPD resonator delete was developed & built for the 145" Super Crew wheelbase as a direct fit. But if you're like me and have a SCAB, they will still work with a slight modification. You can see the difference in length from the stock resonator to the new SPD equal length kit. Super Cabs are 133" wheelbase and as you probably guessed by the pics, we had to cut off exactly 12" off the front of each of the muffler tubes. Once we did that, the new exhaust slipped right on with no problems.

It's only been 1 day but I'm very pleased so far with the sound and performance of the combo. I've seen some reviews where people are saying it's too loud, but I can only assume that they are running aftermarket mufflers. I'm running stock muffler/tail pipes & don't think it's bad at all. There is minimal drone from the exhaust in the midrange RPMs but it falls completely away at highway cruising speeds in 9th & 10th gear. But when you get on it and open it up....WOAH!! It sounds like a beast!!

 

[Raptor812]

Anyway you can get some sound clips with this setup?

 

[chopn8r]

Anyway you can get some sound clips with this setup?

I've been wanting to get some recordings & just been busy. I'll try to do some this weekend.