Front license installation affect on cooling.

[smurfslayer]

There is nothing behind it on my plain jane 800A.

Nothing “plain Jane” about an 800a Raptor. That said, Jane is a fine name for a truck.

 

[xrocket21]

There is nothing behind it on my plain jane 800A.

I did the same!!

 

[marcomilano77]

There is nothing behind it on my plain jane 800A.

So just a couple holes in the bumper to mount it? I might have to do the same since I need the front plate to be mounted when coming back from Baja [emoji53]


Sent from my iPhone using Tapatalk

 

[NASSTY]

So just a couple holes in the bumper to mount it? I might have to do the same since I need the front plate to be mounted when coming back from Baja [emoji53]


Sent from my iPhone using Tapatalk

I drilled 2 small holes in the LH plastic bumper pad.

 

[NJSP117]

There is nothing behind it on my plain jane 800A.

That looks good mounted there. It's required in NJ, but I didn't have the dealer mount the bracket. Mounting it on that bumper pad seems like a good alternative.

 

[CowboyRaptor]

ford recommends...

Can someone please point me to where Ford has recommended moving the plate while using Baja mode / running hard? You buy a $65K truck and you have to move the license place bracket after Ford places it there for a reason? Thanks

 

[dewalt]

Time to read the book

 

[CowboyRaptor]

Time to re-read the book...found it! Still doesn't make sense...

 

[nikhsub1]

Time to re-read the book...found it! Still doesn't make sense...

The center grill where the OEM mount is for the intercooler... so, you don't want to block it with anything, including a license plate. I'd not mount my plate there at all.

 

[JetDriver480]

Isn't the Adaptive Cruise Control sensor located just off center where some of you are putting your plates? Doesn't it interfere?