GEN 2 Front Camera simple relocate no cutting no custom bracket. 30 min job

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Cody Soele

Full Access Member
Joined
Sep 2, 2019
Posts
73
Reaction score
38
Location
Belle Chasse Louisiana
My add honeybadger deemed my front camera useless.

Here is my fix

Remove front grill. Requires 8mm and 10mm socket
Removal of push pins, disconnect two harnesses by hood latch and washer fluid line for camera.

Lift out grill.

Unplug harness for and Disassemble camera housing, I used channel locks for the stud and a 7’mm socket for bolts

Remove camera unit from housing.

Reassemble factory housing.

Place camera in O of ford and use small amount of quick set epoxy on top and bottom. I choose to use small bead in case I decided to go back to stock.

Allow to cure plug back in harness to camera Reassemble

I also took the time to polish my intercooler in the process.

Came out great and functions [emoji1305][emoji1303]


bfd30f6b8c73a022fb7a62d3203d831f.jpg

4145f022ad3a6144a1e6b4f7052513ee.jpg65480a935fd419eca0a08a87dd6467a5.jpg2f4b5cfe8fcfc3383cf4e125445ef2a6.jpg07d3dcc7e678443157a84d39b2896e17.jpg3ea597695c8cc4764e2deebb79a85132.jpg8254ca9545206fe91aed9da2b9d34261.jpg4dfad101e7ba9552535f5f1fafd9e677.jpg240acfee87e96d5834adfd845766a62b.jpg667323ef796dab9b98480e5e40d66f02.jpg
9d22a7489c047277d5e3d726f118f75d.jpg0ab62f707962db2bf28d431e8995d760.jpge7b0bc012a3139094c93ad6ea959b525.jpg
 

sobiloff

Active Member
Joined
May 10, 2017
Posts
94
Reaction score
26
Location
Reno, NV (USA)
Cool! The front perspective in the 360° view is a little wonky, but it beats looking at the back side of the bull bar. I might have to do the same on mine—thanks for the write-up!
 
Top